-
Adding accessories to yLuverne truck is all about highlighting and showing off its existing features, and no front-end accessory shows off these features quite like a LUVERNE grille guard. Luverne 2" tubular grille guard features Luverne signature logo reveal, a made-in-USA construction and a vehicle-specific fit -- all to maximize front-end protection and truly make it all about yLuverne truck. It starts with Luverne classic center section. The horizontal tubes are contoured to create Luverne signature logo reveal, showing off yLuverne vehicle's badge with pride. The tubes also add extra protection for yLuverne vehicle's grille. To add some beef to the front end of yLuverne vehicle, the LUVERNE 2" brush guard is built American-tough. We construct it from high-strength steel, right here in the USA, to ensure the utmost quality. The frame-mounted uprights provide a solid structural base and are shielded with extruded rubber covers to better protect the finish. We also add a polished stainless steel backing to the uprights, giving them a clean, finished appearance that will outlast rust. Luverne 2" tubular grille guards are available in a durable textured black powder coat or a bright chrome-plated finish to suit the look of yLuverne own unique truck. To finish off the LUVERNE 2" steel brush guard and truly make it an accessory fit for yLuverne vehicle, we make each one vehicle-specific. This means no drilling necessary during the install and compatibility with yLuverne factory tow hooks on most models. This particular custom grille guard fits specific years of the Chevrolet Silverado 1500 and GMC Sierra 1500 (see application info to verify fitment). It mounts directly to the frame using strong steel brackets, and the brackets are covered in a black powder coat finish to ensure long-lasting durability. NOTE: Ring assembly and upright package included but shipped separately., LUVERNE 331444-331611 2-Inch Chrome Steel Truck Brush Guard; Select Chevrolet Silverado; GMC Sierra 1500 Chrome -
, LUVERNE 331934-331333 2-Inch Chrome Steel Truck Brush Guard; Select Ram 2500; 3500 Chrome; Carbon Steel; Incl. Grille Guard And Mounting Hardware -
Adding accessories to yLuverne truck is all about highlighting and showing off its existing features, and no front-end accessory shows off these features quite like a LUVERNE grille guard. Luverne 2" tubular grille guard features Luverne signature logo reveal, a made-in-USA construction and a vehicle-specific fit -- all to maximize front-end protection and truly make it all about yLuverne truck. It starts with Luverne classic center section. The horizontal tubes are contoured to create Luverne signature logo reveal, showing off yLuverne vehicle's badge with pride. The tubes also add extra protection for yLuverne vehicle's grille. To add some beef to the front end of yLuverne vehicle, the LUVERNE 2" brush guard is built American-tough. We construct it from high-strength steel, right here in the USA, to ensure the utmost quality. The frame-mounted uprights provide a solid structural base and are shielded with extruded rubber covers to better protect the finish. We also add a polished stainless steel backing to the uprights, giving them a clean, finished appearance that will outlast rust. Luverne 2" tubular grille guards are available in a durable textured black powder coat or a bright chrome-plated finish to suit the look of yLuverne own unique truck. To finish off the LUVERNE 2" steel brush guard and truly make it an accessory fit for yLuverne vehicle, we make each one vehicle-specific. This means no drilling necessary during the install and compatibility with yLuverne factory tow hooks on most models. This particular custom grille guard fits specific years of the Chevrolet Silverado 1500 and GMC Sierra 1500 (see application info to verify fitment). It mounts directly to the frame using strong steel brackets, and the brackets are covered in a black powder coat finish to ensure long-lasting durability. NOTE: Ring assembly and upright package included but shipped separately., LUVERNE 331934-331931 2-Inch Chrome Steel Truck Brush Guard; Select Chevrolet Silverado; GMC Sierra 1500 Chrome -
All Grip Step running boards -- including our Grip Step rear van steps -- offer superior traction with their expanded metal treads. The open treads are non-skid in any weather, highly resistant to wear, and they help maintain a clean interior, allowing dirt and debris to get knocked off your boots and pass through the board when stepping into the vehicle. This promotes a cleaner work space and a more professional presentation for your business. Grip Step 7" running boards for vans are constructed for long hours in the rain, sunshine, sleet or snow. We construct them from an aluminum alloy, making them lightweight and rust-free, but also dependably strong. The lightweight build is ideal for cargo vans and commercial vans that frequently start and stop. It helps keep the vehicle unencumbered by excess weight, promoting optimal gas mileage and a longer vehicle life. The aluminum construction of these van steps offers excellent resistance to corrosion in spite of frequent exposure to rain, road salt and other threats. To maximize corrosion resistance, we also finish them in a highly durable textured black powder coat. This seals the aluminum off from the elements and gives the running boards a sleek, professional look. Tough plastic end caps are also added to the ends of the boards for a final finishing touch and to eliminate any safety hazards with sharp corners. This Ford Transit van step comes with mounting brackets and hardware for a full installation. It also includes reflective tape for increased visibility. The brackets are made from high-strength steel, ensuring dependable rigidity every time you climb into your commercial van. The hardware for attaching the brackets to the boards is made from stainless steel, providing long-lasting rust resistance. Grip Step running boards for vans are also compatible with our aluminum backsplashes. These help keep the side steps cleaner and enhance the look of your work van. They are available for 78" boards (#410078) or 88" boards (#410088) and can be trimmed for a custom fit., GRIP STEP 7" X 54" ALUMINUM PASSENGER RUNNING BOARD FLEET KIT, SELECT TRANSIT #415254-401727-0 Fleet-approved, expanded metal treads for maximum traction and safety. Powder-coated aluminum construction to be strong, lightweight and rust-free. 7" wide stepping surface provides safe, comfortable entry and exit. Open treads knock dirt and snow off your boots to keep the van interior clean. Durable, textured black powder coat for a sleek, professional finish. Smooth, rounded end caps eliminate sharp corners. Easy installation with vehicle-specific mounting brackets. White reflective tape increases step safety and vehicle visibility. Powder-coated brackets use stainless steel fasteners for secure board attachment. Optional black aluminum backsplash available for 78" (#410078) or 88" (#410088) boards. Limited lifetime warranty (five-year finish, one-year parts). Assembled in USA. Notes: Includes one board, mounting brackets, extension brackets and reflective tape (shipped separately, some running board assembly required). Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only. -
Grip Step wheel-to-wheel steps are designed with extra length, compared to standard running boards, extending from the front wheels all the way to the back. You not only get solid footing for climbing in and out of the truck cab, but you also get a convenient step up when reaching into the truck bed. This is ideal on work trucks in commercial, industrial, construction and agricultural settings, providing quicker, easier access to a truck tool box, ladder rack or cargo in the truck bed. Unlike many other truck running boards, Grip Steps offer fleet-grade safety. They are made with expanded metal treads instead of plastic step pads. These treads provide superior traction in wet or muddy conditions, common on the jobsite, and the expanded metal locks onto your shoes or boots, giving you reliable footing for stepping into your truck. Grip Step wheel-to-wheel steps feature a 7" width for a generous, comfortable stepping surface. The expanded metal treads of Grip Step running boards also work to keep your truck cab clean. Because the expanded metal is open, it allows dirt, sand, snow, mud and any other debris to pass through the boards. When you step up, the debris is knocked off your feet and kept outside the truck where it belongs. To give Grip Step wheel-to-wheel running boards the upper hand in any work setting, we construct them from powder-coated aluminum. Aluminum allows us to ensure that these truck side steps remain lightweight and completely rust-resistant in spite of frequent exposure to the elements. Aluminum also offers excellent strength. To maximize corrosion resistance and give these aluminum running boards a sleek, professional look on your truck, they also come with a highly durable textured black powder coat finish. Grip Step aluminum running boards are equipped with hardened plastic end caps to add further protection against the jobsite. The caps not only eliminate dangerous sharp corners on the boards and add a stylish finish, but they also provide a buffer against gravel spray and other small road debris. Installation of Grip Step 7" wheel-to-wheel running boards is perhaps one of the easiest jobs you'll ever undertake. Each set is designed vehicle-specific, meaning it's customized for installation on your own unique truck without tedious modifications and heartache. The brackets use pre-existing mounting points and offer a custom fit. They are constructed from high-strength steel for enhance rigidity, and they have a powder coat finish for lasting reliability. This particular set of Grip Step 7" wheel-to-wheel steps is designed to fit specific years of the Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD (see application information to verify fitment). NOTE: This set of GMC / Chevy running boards includes mounting brackets, but the boards and brackets ship separately., GRIP STEP 7" X 114" ALUMINUM W2W RUNNING BOARDS, SELECT SILVERADO, SIERRA HD #415114-401449 - Grip Step W2W - Rocker Mount. Fleet-approved, expanded metal treads for maximum traction and safety. Powder-coated aluminum construction to be strong, lightweight and rust-free. 7" wide stepping surface provides safe, comfortable entry and exit. Extra wheel-to-wheel length for easier access when reaching into the truck bed. Open treads knock dirt and snow off your boots to help keep the truck cab clean. Durable, textured black powder coat for a sleek, professional finish. Smooth, rounded end caps eliminate sharp corners. Easy installation with vehicle-specific mounting brackets. Powder-coated brackets use stainless steel fasteners for secure board attachment. Optional black aluminum backsplash available for 78" (#410078) or 88" (#410088) boards. Limited lifetime warranty (five-year finish, one-year parts). Assembled in USA. Notes: Includes one pair of running boards and mounting hardware (shipped separately, some running board assembly required). Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only. -
Assembled in USA. Durable black powder coat finish for lasting rust resistance. High-strength steel construction for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Vehicle-specific design for easy, secure installation. Notes:Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only., LUVERNE running boards and side steps are designed to mount with vehicle-specific brackets for a custom fit on each application. This set of mounting hardware is designed to fit specific vehicle applications and running board or side step part numbers. Please see the application information to find which running boards and brackets will fit your vehicle. NOTE: Running boards / side steps are not included in this package and must be purchased separately.
-
LUVERNE running boards and side steps are designed to mount with vehicle-specific brackets for a custom fit on each application. This bracket kit is designed to fit specific running board or side step part numbers and certain years of the Chevrolet Silverado 1500 and GMC Sierra 1500 (see application info to verify fitment). NOTE: Running boards / side steps are not included in this package and must be purchased separately., Bracket Kit; For PN; [415054-401446]; For PN; [415054-401446] -
Make Luverne deliveries, get the job done and outdo Luverne customers' expectations with confidence. LUVERNE Grip Step running boards for vans are Luverne secret weapon for transforming Luverne cargo van into a truly professional work machine. They offer fleet-grade safety, unbeatable durability for the job and a vehicle-specific fit for Luverne commercial van. While LUVERNE offers a number of cargo van accessories to outfit Luverne fleet or solo work van (see Luverne Tuff Guard van grille guard for dependable front-end protection), none has been proven as safe, functional and reliable as Luverne Grip Step running boards. Grip Steps are engineered for hard work and commercial settings, from their high-traction treads to their wide, comfortable stepping surface, to their lightweight, rust-resilient construction., Luverne GRIP STEP 7" X 36", 100" BLACK ALUMINUM RUNNING BOARDS, SELECT FORD TRANSIT #415100-401724; Fleet-approved, expanded metal treads for maximum traction and safety; Powder-coated aluminum construction to be strong, lightweight and rust-free; 7" wide stepping surface provides safe, comfortable entry and exit; Durable, textured black powder coat for a sleek, professional finish; Smooth, rounded end caps eliminate sharp corners; Easy installation with vehicle-specific mounting brackets; Limited lifetime warranty (five-year finish, one-year parts); Includes one shorter running board for the driver side, one longer running board for the passenger side and mounting hardware (shipped separately, some running board assembly required); Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only -
Make Luverne deliveries, get the job done and outdo Luverne customers' expectations with confidence. LUVERNE Grip Step running boards for vans are Luverne secret weapon for transforming Luverne cargo van into a truly professional work machine. They offer fleet-grade safety, unbeatable durability for the job and a vehicle-specific fit for Luverne commercial van. While LUVERNE offers a number of cargo van accessories to outfit Luverne fleet or solo work van (see Luverne Tuff Guard van grille guard for dependable front-end protection), none has been proven as safe, functional and reliable as Luverne Grip Step running boards. Grip Steps are engineered for hard work and commercial settings, from their high-traction treads to their wide, comfortable stepping surface, to their lightweight, rust-resilient construction., LUVERNE 415088-401535 GRIP STEP 88" RUNNING BOARDS FOR SELECT FORD LIGHTNING - Fleet-approved, expanded metal treads for maximum traction and safety. Powder-coated aluminum construction to be strong, lightweight and rust-free. 7" wide stepping surface provides safe, comfortable entry and exit. Open treads knock dirt and snow off your boots to help keep the truck cab clean. Durable, textured black powder coat for a sleek, professional finish. Smooth, rounded end caps eliminate sharp corners. Easy installation with vehicle-specific mounting brackets. Powder-coated brackets use stainless steel fasteners for secure board attachment. Optional black aluminum backsplash available for 78" (#410078) or 88" (#410088) boards. Limited lifetime warranty (five-year finish, one-year parts). Assembled in USA. Notes: Includes one pair of running boards and mounting hardware (shipped separately, some running board assembly required). -
Make Luverne deliveries, get the job done and outdo Luverne customers' expectations with confidence. LUVERNE Grip Step running boards for vans are Luverne secret weapon for transforming Luverne cargo van into a truly professional work machine. They offer fleet-grade safety, unbeatable durability for the job and a vehicle-specific fit for Luverne commercial van. While LUVERNE offers a number of cargo van accessories to outfit Luverne fleet or solo work van (see Luverne Tuff Guard van grille guard for dependable front-end protection), none has been proven as safe, functional and reliable as Luverne Grip Step running boards. Grip Steps are engineered for hard work and commercial settings, from their high-traction treads to their wide, comfortable stepping surface, to their lightweight, rust-resilient construction., LUVERNE 415102-401536 GRIP STEP 102" W2W BOARDS FOR SELECT FORD LIGHTNING - Fleet-approved, expanded metal treads for maximum traction and safety. Powder-coated aluminum construction to be strong, lightweight and rust-free. 7" wide stepping surface provides safe, comfortable entry and exit. Extra wheel-to-wheel length for easier access when reaching into the truck bed. Open treads knock dirt and snow off your boots to help keep the truck cab clean. Durable, textured black powder coat for a sleek, professional finish. Smooth, rounded end caps eliminate sharp corners. Easy installation with vehicle-specific mounting brackets. Powder-coated brackets use stainless steel fasteners for secure board attachment. Limited lifetime warranty (five-year finish, one-year parts). Assembled in USA. Notes: Includes one pair of running boards and mounting hardware (shipped separately, some running board assembly required). -
Includes brackets only (running board sold separately). Vehicle-specific design for easy, secure installation. High-strength steel construction for a solid step. Zinc-primed, powder-coated brackets use stainless fasteners to secure board. Notes: Includes brackets only. Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only, LUVERNE Grip Step XL running boards are designed to mount with vehicle-specific brackets for a custom fit on each van application. This bracket kit is designed to fit a specific running board part number and certain years of the Ford Transit-150, Transit-250 and Transit-350 (see application info to verify fitment). NOTE: Running boards are not included in this package and must be purchased separately. -
The Grip Step XL is a passenger-side running board uniquely engineered for cargo vans, work vans and delivery vans. It features an ultra-wide, 9-1/2-inch stepping surface with expanded steel treads to provide the highest level of comfort and safety for drivers and workers entering and exiting the cargo area from the passenger-side door. The high-traction treads maintain exceptional skid resistance, even in inclement weather, and because they're steel, the treads won't wear down like plastic alternatives. The Grip Step XL board is constructed from 7-gauge, laser-cut steel and is reinforced to avoid flexing and bending. It offers a solid, dependable step for safe entry and exit. Each Grip Step XL running board is designed for vehicle-specific installation. It installs with a custom bracket kit. This board is designed for select model years of the Ford Transit-150, Transit-250 and Transit-350 (see application info to verify fitment). It fits the passenger side of the van only. NOTE: Board and brackets may ship separately., GRIP STEP XL 9-1/2" X 54" STEEL PASSENGER RUNNING BOARD, SELECT FORD TRANSI. Ultra-wide 9-1/2" step for ultimate comfort and functionality on cargo vans. Fleet-approved, expanded steel treads for maximum traction and safety. Reinforced, 7-gauge, laser-cut steel brackets to eliminate flexing and bending. Professional-grade, zinc-primed, textured black powder coat to resist rust. Open treads knock dirt off boots to help keep the van interior clean. Rounded front corner to promote safety and avoid injuries and damage. Limited lifetime warranty (five-year finish, one-year parts). Made in Germany and finished in the USA. Notes: Includes board and brackets (shipped separately). Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only. -
The Grip Step XL is a passenger-side running board uniquely engineered for cargo vans, work vans and delivery vans. It features an ultra-wide, 9-1/2-inch stepping surface with expanded steel treads to provide the highest level of comfort and safety for drivers and workers entering and exiting the cargo area from the passenger-side door. The high-traction treads maintain exceptional skid resistance, even in inclement weather, and because they're steel, the treads won't wear down like plastic alternatives. The Grip Step XL board is constructed from 7-gauge, laser-cut steel and is reinforced to avoid flexing and bending. It offers a solid, dependable step for safe entry and exit. Each Grip Step XL running board is designed for vehicle-specific installation. It installs with a custom bracket kit. This board is designed for select model years of the Ford Transit-150, Transit-250 and Transit-350 (see application info to verify fitment). It fits the passenger side of the van only. NOTE: Board and brackets may ship separately., GRIP STEP XL 9-1/2" X 54" STEEL PASSENGER RUNNING BOARD, SELECT RAM PROMASTER. Ultra-wide 9-1/2" step for ultimate comfort and functionality on cargo vans. Fleet-approved, expanded steel treads for maximum traction and safety. Reinforced, 7-gauge, laser-cut steel brackets to eliminate flexing and bending. Professional-grade, zinc-primed, textured black powder coat to resist rust. Open treads knock dirt off boots to help keep the van interior clean. Rounded front corner to promote safety and avoid injuries and damage. Limited lifetime warranty (five-year finish, one-year parts). Made in Germany and finished in the USA. Notes: Includes board and brackets (shipped separately). Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only.
-
Get the job done right with LUVERNE Grip Step 7" running boards. These roughneck truck side steps feature a unique expanded metal tread pattern for superior traction and a 7" width for reliable footing. They are built from aluminum alloy for exceptional, rust-free strength, and they are simple to install using high-strength vehicle-specific brackets. Grip Steps are made right here in the USA for quality you can trust and footing you that wont let you down. The rugged, expanded metal tread and angular design of Grip Step running boards truly makes them a side accessory fit for Luverne work truck or commercial van. No matter the season, the superior traction of Grip Steps locks onto the bottom of Luverne boots and provides safe vehicle entry and exit. Because they boast an impressive 7" width, the side steps are as comfortable as they are skid-resistant. We know the job doesnt make exceptions to keep Luverne vehicle looking pretty, and that is why Grip Step running boards are made from aluminum and shielded in a tough powder coat finish. We use a 5052 aluminum alloy to provide maximum strength and unstoppable rust resistance. To finish things off and add a professional touch, we also apply a durable textured black powder coat and contoured black plastic end caps to further protect against dirt, moisture and other threats on the job. To make installation as simple as possible, Grip Step 7" running boards are each designed for a custom-fit installation, using vehicle-specific mounting brackets. The brackets are covered in a durable black powder coat finish and bolt onto the boards using stainless steel fasteners for long-lasting strength. This particular set of Grip Step running boards is designed to fit specific years of the Ram 1500, 2500, 3500, 4500 or 5500 and Dodge Ram 1500 (see application info to verify fitment). These running boards come with brackets, but the brackets are shipped separately., LUVERNE 415060-401631 Grip Step Black Aluminum 60-Inch Truck Running Boards; Select Ram 1500; 2500; 3500; 4500; 5500; Dodge Ram 1500 Black Textured Powder Coat -
Get the job done right with LUVERNE Grip Step 7" running boards. These roughneck truck side steps feature a unique expanded metal tread pattern for superior traction and a 7" width for reliable footing. They are built from aluminum alloy for exceptional, rust-free strength, and they are simple to install using high-strength vehicle-specific brackets. Grip Steps are made right here in the USA for quality you can trust and footing you that wont let you down. The rugged, expanded metal tread and angular design of Grip Step running boards truly makes them a side accessory fit for Luverne work truck or commercial van. No matter the season, the superior traction of Grip Steps locks onto the bottom of Luverne boots and provides safe vehicle entry and exit. Because they boast an impressive 7" width, the side steps are as comfortable as they are skid-resistant. We know the job doesnt make exceptions to keep Luverne vehicle looking pretty, and that is why Grip Step running boards are made from aluminum and shielded in a tough powder coat finish. We use a 5052 aluminum alloy to provide maximum strength and unstoppable rust resistance. To finish things off and add a professional touch, we also apply a durable textured black powder coat and contoured black plastic end caps to further protect against dirt, moisture and other threats on the job. To make installation as simple as possible, Grip Step 7" running boards are each designed for a custom-fit installation, using vehicle-specific mounting brackets. The brackets are covered in a durable black powder coat finish and bolt onto the boards using stainless steel fasteners for long-lasting strength. This particular set of Grip Step running boards is designed to fit specific years of the Ford F250 Super Duty, F350 Super Duty, F450 Super Duty and F550 Super Duty (see application info to verify fitment). These running boards come with brackets, but the brackets are shipped separately., LUVERNE 415088-409922 Grip Step Black Aluminum 88-Inch Truck Running Boards; Select Ford F-250; F-350; F-450; F-550 Super Duty Black Textured Powder Coat -
LUVERNE Grip Step wheel-to-wheel running boards equip Luverne pickup truck for whatever job lies ahead. They offer easier truck bed access, fleet-level safety, a highly rust-free construction and a custom fit for Luverne truck and lifestyle. Grip Step wheel-to-wheel steps are the ideal solution for better truck bed access. Whether you need to reach a truck tool box, ladder rack or some cargo in the truck bed, the wheel-to-wheel steps are extra-long, providing a convenient step up for reaching into the truck bed. Grip Step running boards are also built for hard work, featuring expanded metal treads that offer fleet-approved safety. The open treads ensure maximum traction for Luverne boots -- whether rain or shine -- and they also help keep Luverne trucks interior clean by allowing dirt, snow and debris to pass through the boards. For superior resistance to the elements, Grip Step wheel-to-wheel running boards are made from aluminum alloy. Theyre strong, lightweight and highly corrosion-resistant. To maximize this corrosion resistance, the running boards and brackets are both shielded in a durable black powder coat finish. The running boards also feature hardened plastic end caps that eliminate sharp corners and add a professional touch. All LUVERNE Grip Step wheel-to-wheel steps are designed for vehicle-specific applications. This ensures a custom fit and the easiest possible installation. The running boards mount with vehicle-specific brackets and use pre-existing mounting points to avoid difficult modifications. This particular set of wheel-to-wheel running boards is designed to fit specific years of the Ram 3500 (see application information to verify fitment; brackets included but shipped separately)., LUVERNE 415125-401339 Grip Step Black Aluminum 125-Inch Wheel to Wheel Running Boards; Select Ram 3500 Black Textured Powder Coat; Body Mount -
LUVERNE Grip Step wheel-to-wheel running boards equip Luverne pickup truck for whatever job lies ahead. They offer easier truck bed access, fleet-level safety, a highly rust-free construction and a custom fit for Luverne truck and lifestyle. Grip Step wheel-to-wheel steps are the ideal solution for better truck bed access. Whether you need to reach a truck tool box, ladder rack or some cargo in the truck bed, the wheel-to-wheel steps are extra-long, providing a convenient step up for reaching into the truck bed. Grip Step running boards are also built for hard work, featuring expanded metal treads that offer fleet-approved safety. The open treads ensure maximum traction for Luverne boots -- whether rain or shine -- and they also help keep Luverne trucks interior clean by allowing dirt, snow and debris to pass through the boards. For superior resistance to the elements, Grip Step wheel-to-wheel running boards are made from aluminum alloy. Theyre strong, lightweight and highly corrosion-resistant. To maximize this corrosion resistance, the running boards and brackets are both shielded in a durable black powder coat finish. The running boards also feature hardened plastic end caps that eliminate sharp corners and add a professional touch. All LUVERNE Grip Step wheel-to-wheel steps are designed for vehicle-specific applications. This ensures a custom fit and the easiest possible installation. The running boards mount with vehicle-specific brackets and use pre-existing mounting points to avoid difficult modifications. This particular set of wheel-to-wheel running boards is designed to fit specific years of the Chevy Silverado 1500, 2500 HD or 3500 HD and GMC Sierra 1500, 2500 HD or 3500 HD (see application information to verify fitment; brackets included but shipped separately)., LUVERNE 415088-401447 Grip Step Black Aluminum 88-Inch Wheel to Wheel Running Boards; Select Chevrolet Silverado; GMC Sierra 1500; 2500 HD; 3500 HD Rocker Mount; Black Textured Powder Coat -
LUVERNE Grip Step wheel-to-wheel running boards equip Luverne pickup truck for whatever job lies ahead. They offer easier truck bed access, fleet-level safety, a highly rust-free construction and a custom fit for Luverne truck and lifestyle. Grip Step wheel-to-wheel steps are the ideal solution for better truck bed access. Whether you need to reach a truck tool box, ladder rack or some cargo in the truck bed, the wheel-to-wheel steps are extra-long, providing a convenient step up for reaching into the truck bed. Grip Step running boards are also built for hard work, featuring expanded metal treads that offer fleet-approved safety. The open treads ensure maximum traction for Luverne boots -- whether rain or shine -- and they also help keep Luverne trucks interior clean by allowing dirt, snow and debris to pass through the boards. For superior resistance to the elements, Grip Step wheel-to-wheel running boards are made from aluminum alloy. Theyre strong, lightweight and highly corrosion-resistant. To maximize this corrosion resistance, the running boards and brackets are both shielded in a durable black powder coat finish. The running boards also feature hardened plastic end caps that eliminate sharp corners and add a professional touch. All LUVERNE Grip Step wheel-to-wheel steps are designed for vehicle-specific applications. This ensures a custom fit and the easiest possible installation. The running boards mount with vehicle-specific brackets and use pre-existing mounting points to avoid difficult modifications. This particular set of wheel-to-wheel running boards is designed to fit specific years of the Ram 3500 (see application information to verify fitment; brackets included but shipped separately)., LUVERNE 415125-401338 Grip Step Black Aluminum 125-Inch Wheel to Wheel Running Boards; Select Ram 3500 Black Textured Powder Coat; Rocker Mount -
The LUVERNE Impact shock-absorbing rear bumper guard and step is the perfect accessory for delivery vans and other cargo vans. It is designed to absorb rear impacts and avoid frame damage to the vehicle, specifically when backing into loading areas. It helps protect against pillars, guard rails and other obstacles. This shock-absorbing back bumper takes the stress out of yLuverne delivery route and helps increase work efficiency and vehicle longevity. This particular rear bumper comes with a custom bracket kit for select years of the Ford Transit-150, Transit-250 and Transit-350 (see application info to verify fitment). The Impact rear bumper is constructed from reinforced steel for exceptional strength, and it has a dual A-coat and powder coat finish to resist rust, scratches and UV damage. This aftermarket van bumper also functions as a rear step, featuring a 9-1/2-inch surface with expanded treads for maximum traction. The step provides easy access to the rear cargo area. This kit includes the bumper and mounting brackets with struts. Components may be shipped separately., LUVERNE 415358-571501 Impact Shock-Absorbing Cargo Van Rear Bumper Guard and Step; Select Ford Transit 150; 250; 350 Incl. Bracket Kit -
The LUVERNE Impact shock-absorbing rear bumper guard and step is the perfect accessory for delivery vans and other cargo vans. It is designed to absorb rear impacts and avoid frame damage to the vehicle, specifically when backing into loading areas. It helps protect against pillars, guard rails and other obstacles. This shock-absorbing back bumper takes the stress out of yLuverne delivery route and helps increase work efficiency and vehicle longevity. This particular rear bumper comes with a custom bracket kit for select years of the Ford Transit-150, Transit-250 and Transit-350 (see application info to verify fitment). The Impact rear bumper is constructed from reinforced steel for exceptional strength, and it has a dual A-coat and powder coat finish to resist rust, scratches and UV damage. This aftermarket van bumper also functions as a rear step, featuring a 9-1/2-inch surface with expanded treads for maximum traction. The step provides easy access to the rear cargo area. This kit includes the bumper and mounting brackets with struts. Components may be shipped separately., LUVERNE 415358-571502 Impact Shock-Absorbing Cargo Van Rear Bumper Guard and Step; Select Ram ProMaster 1500; 2500; 3500 Incl. Bracket Kit -
MegaStep running boards are engineered to provide the convenience and functionality of full-length running boards, while maintain the look and feel popular to nerf bars. Rather than individually placed step pads, they feature non-skid treads that run the entire length of the boards. This provides a convenient step wherever needed. Additionally, these truck side steps feature a bright, mirror-like finish that contours to the tapered boards, offering a sleek accent and nerf bar look on your truck or commercial van. For dependable safety both on the jobsite and in your daily commute, MegaStep running boards are equipped with high-traction rubber treads. Rubber allows them to grip the bottom of your boots or shoes unlike any plastic step pad, giving you safe entry and exit from the vehicle. The rubber treads also feature integrated channels that span the length of the boards, helping to shed water and mud for a cleaner, safer step. MegaSteps are uniquely constructed to be both aluminum running boards and stainless steel running boards. This is done using a two-fold construction. The base of MegaStep truck running boards is an extruded aluminum alloy. We use a hardened T6 aluminum to ensure strength, a lightweight design and unparalleled corrosion resistance. The face of MegaStep running boards is a polished stainless steel trim. This adds a style similar to nerf bars with a bright, rust-resistant accent on your truck. MegaStep running boards are custom-fitted for each unique vehicle application. The mounting brackets are each made vehicle-specific, using pre-existing mounting points to bolt onto the vehicle. This greatly reduces the installation time and ensures a custom fit. The boards are also designed in vehicle-specific lengths to perfectly integrate with the layout of each truck or van application. For further customization, MegaStep running boards are adjustable. With the brackets mounted on the vehicle, slotted holes allow the side steps to be adjusted forward, backward or side to side. This ensures that you get a solid step exactly where you need it when entering or exiting the vehicle. This particular set of MegaStep running boards is designed to fit specific years of the Chevy Express 1500, 2500 or 3500 and GMC Savana 1500, 2500 or 3500 (see application information to verify fitment with your vehicle). The brackets are made from high-strength steel for dependable strength and rigidity, and they feature a durable black powder coat finish for long-lasting corrosion resistance., MEGASTEP 6-1/2" X 36", 100" ALUMINUM RUNNING BOARDS, SELECT EXPRESS, SAVANA #575100-570344 - Van MegaSteps - 36" & 98" Steps - 135" WB. Nerf bar styling with the convenience of a full-length running board step. Extruded aluminum core to be strong, lightweight and rust-free. High-polish, 18-gauge stainless steel trim for a bright, clean finish. Boards easily adjust in, out, forward or backward to suit personal preference. 6-1/2" x 3" boards with a 5" non-skid rubber treads for a safe, comfortable step. Vehicle-specific brackets with pre-installed fasteners for easy installation. High-strength steel brackets feature a durable black powder coat finish. Optional black plastic backsplash available for 88" (#570090) in 98" (#570098). Limited lifetime warranty (five-year finish, one-year parts). Assembled in USA. Notes: Includes one pair of running boards and mounting hardware (shipped separately). Any Service Parts noted in the Installation Sheets are not for individual sale, for reference only. -
LUVERNE MegaStep 6-1/2" running boards are the ultimate combination of style and functionality. They have 5" wide treads that extend the full length of the side steps, and they feature a strong, lightweight aluminum core with a stainless steel trim for a bright, clean accent. MegaStep running boards mount easily with vehicle-specific brackets, pre-installed fasteners and an adjustable design to perfectly fit Luverne unique vehicle. LUVERNE MegaSteps are designed to offer the best features from a variety of side accessory options. Their non-skid rubber treads cover the entire topside of the boards, giving them the functionality and convenience of a running board. However, unlike most running boards, MegaSteps are styled after the popular look of many nerf bars. This makes them a unique and useful extension of Luverne vehicle. To give MegaStep running boards an even greater advantage over other side steps, they are built to outlast the elements. We construct them with a strong, lightweight aluminum base that naturally resists rust, and we finish them with a high-polish stainless steel trim. The trim is a heavy-duty, 18-gauge stainless steel to make it more than just a fancy accent, and its highly polished finish gives the running boards a bright, long-lasting shine. Installation of LUVERNE MegaStep running boards is easy and customizable. The boards come with pre-installed fasteners and attach using high-strength, vehicle-specific mounting brackets. They are also uniquely designed to be adjustable inward, outward, forward or backward, giving you complete freedom to position the steps wherever you want them. This particular set of running boards is designed to fit specific years of the Chevrolet Silverado 1500 and GMC Sierra 1500 Quad cab (see application info to verify fitment). Brackets for these running boards are included but ship separately., LUVERNE 575078-581444 MegaStep Nerf Bars 78-Inch Truck Running Boards; Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD Extended Cab Polished Stainless -
LUVERNE MegaStep 6-1/2" running boards are the ultimate combination of style and functionality. They have 5" wide treads that extend the full length of the side steps, and they feature a strong, lightweight aluminum core with a stainless steel trim for a bright, clean accent. MegaStep running boards mount easily with vehicle-specific brackets, pre-installed fasteners and an adjustable design to perfectly fit Luverne unique vehicle. LUVERNE MegaSteps are designed to offer the best features from a variety of side accessory options. Their non-skid rubber treads cover the entire topside of the boards, giving them the functionality and convenience of a running board. However, unlike most running boards, MegaSteps are styled after the popular look of many nerf bars. This makes them a unique and useful extension of Luverne vehicle. To give MegaStep running boards an even greater advantage over other side steps, they are built to outlast the elements. We construct them with a strong, lightweight aluminum base that naturally resists rust, and we finish them with a high-polish stainless steel trim. The trim is a heavy-duty, 18-gauge stainless steel to make it more than just a fancy accent, and its highly polished finish gives the running boards a bright, long-lasting shine. Installation of LUVERNE MegaStep running boards is easy and customizable. The boards come with pre-installed fasteners and attach using high-strength, vehicle-specific mounting brackets. They are also uniquely designed to be adjustable inward, outward, forward or backward, giving you complete freedom to position the steps wherever you want them. This particular set of running boards is designed to fit specific years of the Chevrolet Silverado 1500 and GMC Sierra 1500 crew cab (see application info to verify fitment). Brackets for these running boards are included but ship separately., LUVERNE 575088-581444 MegaStep Nerf Bars 88-Inch Truck Running Boards; Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD Crew Cab Polished Stainless -
LUVERNE MegaStep wheel-to-wheel running boards give you the best of both worlds with a ready-to-work construction and the stylish of popular nerf bars. They feature high-traction rubber treads, a sleek finish and a non-corrosive build -- all to give you dependable footing whether youre headed for work or play. MegaStep wheel-to-wheel running boards are uniquely designed with extra length on the rear of the boards, reaching all the way to the back wheels. This provides a convenient and secure step for reaching into the truck bed and accessing the crossover truck tool box, headache rack or 5th wheel hitch. The entire length of the running boards is covered with a non-skid rubber tread for enhanced safety, even in wet, rainy conditions. Unlike plastic treads, rubber offers better grip for Luverne boots or shoes. The base of MegaStep wheel-to-wheel running boards is an extruded aluminum alloy, providing excellent strength, while remaining lightweight and completely rust-free. To give these truck side steps a touch of style, they are fitted with a polished stainless steel trim that contours around the boards and gives them a look similar to popular nerf bars. The trim piece is polished to a mirror-like shine and easily withstands rain, snow, dirt and more. To make installation fast, easy and secure, LUVERNE MegaStep wheel-to-wheel steps are made vehicle-specific. Each set has a specific board length and vehicle-specific brackets, providing a custom fit for each unique truck. The brackets install using pre-existing mounting points to eliminate difficult modifications, and the running boards can be positioned inward, outward, forward or backward to suit personal preferences. This particular set of MegaStep wheel-to-wheel running boards is designed for specific years of the Chevrolet Silverado 1500 and GMC Sierra 1500 crew cab (see application information to verify fitment; brackets included but shipped separately)., LUVERNE 575102-581444 MegaStep 102-Inch Wheel-to-Wheel Truck Running Boards; Select Chevrolet Silverado; GMC Sierra 1500 Crew Cab with 5ft.9in. Bed 102 in; Polished Stainless
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved