-
The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It's molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Included., The DECKED Tool Box is NOT compatible with any DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8' trucks, the drawers are not compatible with the Tool Box for any short 5'6" or standard 6'6" bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm. -
The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It's molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Not Included (PN# TBFSLADDER), The DECKED Tool Box is NOT compatible with all DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8' trucks, the drawers are not compatible with the Tool Box for any short 5'6" or standard 6'6" bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm. -
58" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws. -
48" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
-
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Shallow Stash Bins: 8.5" x 6.4" 2.5" 1.5 L 0.04 lb -
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Deep Stash Bins: 8.5" x 6.4" 9.5" 5.8 L 1 lb -
Own a DECKED Tool Box without a Ladder and want another Snack Tray? (We don't blame you, who doesn't love snacks?!) Add one to your existing Tool Box without a Ladder to store all those knick-knacky things, like screwdrivers, pliers, measuring tapes, gloves, you name it! The Snack Tray fits snugly into grooves on each side of the Tool Box so you have convenient access to all your small tools and gear. NOTE: All Tool Boxes come with one Snack Tray on the driver's side. Ordering a second Snack Tray will only fit a DECKED Tool Box without a ladder. The Snack Tray is NOT compatible with any Drawer Systems, the D-Box, Crossbox, or any other accessories., The Snack Tray fits the DECKED Tool Box Only. Securing into grooves on each side of the Tool Box, the Snack Tray provides convenient access to all your loose bits and small tools. All DECKED Tool Boxes come standard with (1) Snack Tray. A second Snack Tray will only fit a Tool Box without a ladder. -
Piecekeepers include two foam-backed, molded resin dividers for transporting shotguns and rifles securely in your DECKED Drawer System. They offer secure, padded cradles that grip the stock and barrel for convenient, easy-to-remove-and-replace access to firearms. Peacekeepers have slotted cutouts to accommodate three long guns per wide drawer or two long guns per midsize narrow drawer. Piecekeepers secure into place inside the drawers. Utilizing the same multi-position drawer slots and locking clips as Drawer Dividers, they can be easily adjusted as needed. Additional clips are included. WIDE PIECEKEEPERS: fit BOTH drawers on full-size truck and cargo van Drawers Systems, AND the WIDE drawer on midsize trucks. Accommodates 3 long guns. DOES NOT FIT THE DECKED TOOL BOX. Piecekeepers only fit the Drawer System. IT IS ENTIRELY POSSIBLE THAT YOUR FIREARM WILL NOT FIT TO ALLOW THE DRAWER TO CLOSE. IN MANY CASES, IT IS IMPOSSIBLE TO KNOW THE FIT UNTIL PHYSICALLY TESTING IT. Piecekeepers are designed for traditional rifles and shotguns. We cannot guarantee your particular flavor of firearm will fit. Due to the variety of shapes, sizes, and dimensions, many modern guns with optics, pistol grips, removable magazines, and other accessories may stack too high to allow the drawer to close. We have provided our best attempt at dimensions., WIDE PIECEKEEPERS: 7.79 tall x 18 5/8 wide, Center slot depth: 4.25, Side slots measured diagonally: 5.25 , Clearance above Piecekeeper is less than 1", Accommodates 3 long guns. Comes in a set of two. Piecekeepers securely transport firearms in your DECKED Drawer System. Designed for traditional rifles and shotguns. The WIDE Piecekeepers are compatible with ALL full-size truck and cargo van drawers. They are also compatible with the WIDE drawer for midsize trucks. Due to the variety of shapes and dimensions, we cannot guarantee your particular flavor of firearm will fit. Many modern long rifles with optics, pistol grips, and removable magazines may stack too high to allow the drawer to close. -
Set of 4 Load Locks for use with our Core Trax 1000 tie-down tracks., These load locks for use with our Core Trax 1000 tie-downs. Stainless Steel attachment loops with a pullout rating of 500 lbs. -
The DECKED Drawerganizer fits all fill-size drawers and midsize wide drawers. Does not fit midsize narrow drawers., The DRAWERGANIZER is the molded version of ultra-comfy boxer briefs. An accessory which gently cradles al the loos bits rolling around chaotically inside your DECKED drawers. It nests into the handle end of your drawers creating a handy, useful storage space for small tools, hardware, bugspray, duct tape... without them, you're basically going commando. Features: High Impact Polypropylene, Easy Grab Handle, Prop 65 Compliant Material, Battles Clutter and Disorganization, and Easily Accessible. 696 Cubic Inches. 2.6 lbs. Dimensions: 17.625" x 10.125" x 8" -
The Drawer Systems top deck is great for what its designed to do - holding tons of gear! But the deck (made of ultra-durable HDPE) can get a little slippery. The lightly padded, slip-resistant DECKED Traction Mat solves this problem. Perfect for holding things like coolers, cases, kennels, and pets in place - all while making it easier on your knees, elbows, and back should you be crawling around in your truck bed. Fits ALL DECKED Drawer Systems (Does not fit legacy systems)., Features: Adhesive backing - lay it down like a giant sticker. Cut to match the Drawer System surface with chamfered edges. Simple installation; start at the tailgate end of the bed, peel, align, and stick it down. Does not interfere with Drawer System removal or reinstallation. Won't leave residue or fragments upon removal. -
Secure your most expensive cargo with these D-Ring Tie Downs. The ultimate solution for rough roads, loose loads, and whatever you are trying to grapple. Strap it in, lock it down, and stomp the gas pedal without a care in the world. 400lb rating per D-Ring Tie Down., Features: Anti-corrosion steel. 100% Made in the USA. 2 per pack. Fits ALL current DECKED Drawer Systems (Does not fit legacy systems). New Drawer Systems come standard with 4x D-Ring Tie Downs.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved