-
This brake controller mounting bracket is designed specifically to fit the CURT Venturer trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation., VENTURER TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51114 Securely mounts CURT Venturer trailer brake controller #51110. Controller can be mounted anywhere in the vehicle, at any angle. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. NOTES: Includes four mounting screws. -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION BOLT-ON HOOKUP BRACKETS (2-PACK) #17005 Allows for repositioning of spring bars around an LP tank or other obstruction. Replaces factory spring bar brackets or hangers. Bolt-on design uses two bolts per bracket to fasten directly to the frame. Brackets protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Some drilling required. Includes two chain hangers, bolts and pins (chains not included). -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION CLAMP-ON HOOKUP BRACKETS (2-PACK) #17003 Allows for repositioning of spring bars around an LP tank or other obstruction. Replaces factory spring bar brackets or hangers. Clamp-on design uses a bolt to fasten tightly on the frame. Brackets protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes two chain hangers, bolts and pins (chains not included). -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION LIFT HANDLE #17112 Allows for easy leveraging of weight distribution hookup brackets. Compatible with CURT weight distribution replacement hookup bracket #17008. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2-1/2" SHANK, 2" DROP, 6" RISE) #17131 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2-1/2" x 2-1/2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a highly durable carbide black powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2-1/2" SHANK, 8" DROP) #17132 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2-1/2" x 2-1/2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a highly durable carbide black powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 14-1/2" DROP) #17125 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. Not designed to be used in the rise position. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17100 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17102 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17103 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 5-5/8" DROP, 8-7/8" RISE) #17120 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 6" DROP, 10-1/4" RISE) #17121 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 6" DROP, 10-1/4" RISE) #17122 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 7" DROP, 10-1/2" RISE) #17123 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 8-3/4" DROP) #17124 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. Not designed to be used in the rise position. -
For the do-it-yourselfer, CURT offers an entire line of towing fabrication components to supply you with the quality building blocks you need. These raw steel components are made from solid steel for maximum strength, and they come ready to be welded together in whatever form you need to get the job done. This CURT fabrication steel safety chain anchor features a load capacity of 10,000 lbs. and provides a solid weld-on safety chain attachment point., Raw Steel Weld-On Safety Chain Loop (10,000 lbs. Capacity) CURT 49950 Weld-On Raw Steel Safety Chain Loop, 10,000 lbs. -
For mounting the CURT sway control unit #17200, this sway control tab provides a secure solution and an alternative when a weight distribution hitch is not needed. It is designed to be welded onto a ball mount or other insert and provide a mounting platform for the CURT sway control ball #40093., WELD-ON SWAY TAB #45822 Welds onto a ball mount or trailer hitch for sway control. Sway control unit helps limit lateral trailer movement. Made in USA. -
Making sure that your cargo is tied down and fully secure for the journey is important for any towing job. Not only is unsecured cargo a danger to you, your passengers and your fellow drivers, but it can also cause damage to your trailer, pickup truck bed or vehicle cargo area, as well as to the cargo itself. Together with our cargo straps and safety chains, CURT tiedown anchors are easy to mount in any trailer, truck or full-size van, and they help keep your items safe for the road ahead. This particular D-ring tiedown anchor is designed to be welded onto a metal frame to add a solid anchoring point for cargo straps, ropes, cables or chains. It features forged steel construction and a capacity of 46,760 lbs., making it strong enough for many commercial and industrial applications. The heavy-duty D-ring and bracket feature a raw finish to be readily welded on, and the ring offers a large opening to accept clevis hooks., 3"X 3" WELD-ON TIE-DOWN D-RING (15,587 LBS, RAW STEEL) #83770 Adds a heavy-duty anchor point for ropes, cables, straps or chains. Perfect for heavyweight cargo management in trailers and trucks. Features a capacity of 46,760 lbs.. Raw finish allows for ready welding of mounting bracket. Constructed from high-strength, forged steel. 2-1/4" x 2-1/8" x 1-3/4" weld-on mounting bracket provides a sturdy base. 5" x 5" x 1" ring offers a large opening and a reliable anchoring point. Limited lifetime warranty (one-year finish, one-year parts). -
Making sure that your cargo is tied down and fully secure for the journey is important for any towing job. Not only is unsecured cargo a danger to you, your passengers and your fellow drivers, but it can also cause damage to your trailer, pickup truck bed or vehicle cargo area, as well as to the cargo itself. Together with our cargo straps and safety chains, CURT tiedown anchors are easy to mount in any trailer, truck or full-size van, and they help keep your items safe for the road ahead. This particular D-ring tiedown anchor is designed to be welded onto a metal frame to add a solid anchoring point for cargo straps, ropes, cables or chains. It features forged steel construction and a capacity of 46,760 lbs., making it strong enough for many commercial and industrial applications. The heavy-duty D-ring and bracket feature a raw finish to be readily welded on, and the ring offers a large opening to accept clevis hooks., 3"X 4" WELD-ON TIE-DOWN D-RING (15,587 LBS, RAW STEEL) #83780 Adds a heavy-duty anchor point for ropes, cables, straps or chains. Perfect for heavyweight cargo management in trailers and trucks. Features a capacity of 46,760 lbs.. Raw finish allows for ready welding of mounting bracket. Constructed from high-strength, forged steel. 2-1/4" x 2-1/8" x 1-3/4" weld-on mounting bracket provides a sturdy base. 6" x 5" x 1" ring offers a large opening and a reliable anchoring point. Limited lifetime warranty (one-year finish, one-year parts). -
Making sure that your cargo is tied down and fully secure for the journey is important for any towing job. Not only is unsecured cargo a danger to you, your passengers and your fellow drivers, but it can also cause damage to your trailer, pickup truck bed or vehicle cargo area, as well as to the cargo itself. Together with our cargo straps and safety chains, CURT tiedown anchors are easy to mount in any trailer, truck or full-size van, and they help keep your items safe for the road ahead. This particular D-ring tiedown anchor is designed to be welded onto a metal frame to add a solid anchoring point for cargo straps, ropes, cables or chains. It features forged steel construction and a capacity of 18,000 lbs., making it strong enough for many commercial and industrial applications. The heavy-duty D-ring and bracket feature a raw finish to be readily welded on, and the ring offers a large opening to accept clevis hooks., 3"X 3" WELD-ON TIE-DOWN D-RING (6,100 LBS, RAW STEEL) #83750 Adds a heavy-duty anchor point for ropes, cables, straps or chains. Perfect for heavyweight cargo management in trailers and trucks. Features a capacity of 18,000 lbs.. Raw finish allows for ready welding of mounting bracket. Constructed from high-strength, forged steel. 2-1/4" x 1-5/8" x 1-1/4" weld-on mounting bracket provides a sturdy base. 4-1/4" x 4-1/4" x 5/8" ring offers a reliable anchoring point. Limited lifetime warranty (one-year finish, one-year parts). -
Making sure that your cargo is tied down and fully secure for the journey is important for any towing job. Not only is unsecured cargo a danger to you, your passengers and your fellow drivers, but it can also cause damage to your trailer, pickup truck bed or vehicle cargo area, as well as to the cargo itself. Together with our cargo straps and safety chains, CURT tiedown anchors are easy to mount in any trailer, truck or full-size van, and they help keep your items safe for the road ahead. This particular D-ring tiedown anchor is designed to be welded onto a metal frame to add a solid anchoring point for cargo straps, ropes, cables or chains. It features forged steel construction and a capacity of 26,500 lbs., making it strong enough for many commercial and industrial applications. The heavy-duty D-ring and bracket feature a raw finish to be readily welded on, and the ring offers a large opening to accept clevis hooks., 3"X 3" WELD-ON TIE-DOWN D-RING (8,833 LBS, RAW STEEL) #83760 Adds a heavy-duty anchor point for ropes, cables, straps or chains. Perfect for heavyweight cargo management in trailers and trucks. Features a capacity of 26,500 lbs.. Raw finish allows for ready welding of mounting bracket. Constructed from high-strength, forged steel. 2-1/4" x 1-5/8" x 1-1/4" weld-on mounting bracket provides a sturdy base. 4-1/4" x 4-1/2" x 3/4" ring offers a reliable anchoring point. Limited lifetime warranty (one-year finish, one-year parts). -
The CURT welded D-ring mount features a heavy-duty ball mount platform with a 1" ball hole to accept a large trailer ball. It also comes with a large D-ring welded onto the top to provide a place for straps or hooks to latch on in recovery towing and straight towing applications. When used in the drop position, this specialty ball mount offers 6" of drop and has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. When used for rise, it offers 4" of rise and has a GTW of 6,000 lbs. and a TW of 600 lbs. Like many of our other specialized ball mounts, we coat the CURT welded D-ring ball mount in a durable gloss black powder coat finish for long-lasting resistance to rust, scratches and UV damage., WELDED D-RING BALL MOUNT (2" SHANK, 7,500 LBS., 6" DROP) #45004 Fits trailer hitches with a 2" x 2" receiver tube opening. Equipped with a 1" hole to accept a trailer ball shank. Welded D-ring accepts tow straps or hooks. 4" rise or 6" drop for precise trailer leveling. Angled shank end for easier insertion into the receiver tube. Hollow shank weighs less and can be used with an anti-rattle kit. CNC-formed, robotically welded and mechanically descaled for a perfect fit. Protected by a durable powder coat finish. Patent# 8,226,107. Limited lifetime warranty (one-year finish, one-year parts). -
The CURT wheel chock lock is an excellent way to protect an unattended trailer or camper. It is a quick and simple lock to apply, clamping over the wheel and remaining secure until it is unlocked using one the two provided keys. It is also expandable to fit a variety of tire widths. The wheel chock lock can be used on your trailer or automotive vehicle such as a car, truck or even an ATV if needed. For all of your trailer security needs, look to CURT for the lock to keep that boat, RV, toy hauler -- whatever it may be! -- safe and sound., WHEEL CHOCK LOCK (YELLOW POWDER COAT) #23175 Secures unattended trailers, RVs or vehicles by clamping onto the wheel. Chocks and locks the wheel to prevent roll-away. Expandable width fits most tire sizes. Red rubber-coated arms protect the wheel's finish. Protected by a yellow powder coat finish. Includes two keys for added convenience. Limited lifetime warranty (one-year finish, one-year parts). -
To ensure safety, a vehicle's parking brake should not be the only thing to keep the weight of the vehicle and trailer in place, especially if they are parked on any kind of incline. CURT wheel chocks are designed to be used together with the emergency brake to stop your vehicle from moving. They are constructed from durable plastic and offer a generous 17" width. This allows them to be used with a variety of wheel and vehicle sizes, though they should never be used for commercial applications. CURT wheel chocks also feature a raised tread to better grip the wheel and saw-tooth edges on the base for better traction on the ground., WHEEL CHOCK SET (UP TO 17" WIDE WHEELS) #22800 Ideal for chocking wheels on a parked trailer. Perfect for adding safety during vehicle maintenance. Compatible with wheels up to 17" wide. Raised tread offers a better grip on the wheel. Saw-tooth edges on the base provide solid traction on the ground. Constructed from durable plastic. Always to be used with vehicle brake. Not for commercial use. Limited lifetime warranty (one-year finish, one-year parts).
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved