-
This replacement battery case for breakaway kits measures 5" wide, 3-1/4" high and 3-7/8" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a lockable tab to accept a padlock and deter tampering and theft. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5" X 3-1/4" X 3-7/8" LOCKABLE BREAKAWAY BATTERY CASE #52030 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Lockable lid accepts a padlock for increased security. Constructed from durable polyethylene plastic. -
The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT WITH CHARGER #52040 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using the included charger. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch, battery charger and mounting hardware. -
If you're towing your vehicle along for your next RV adventure, Bring It with CURT! CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing. This particular RV dinghy tow wiring harness is designed for select years of the Ford F-250 Super Duty and F-350 Super Duty with backup sensors (see application info to verify fitment). With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing tail lights, turn signals and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights are able to operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. The simple plug-and-play design of CURT towed-vehicle RV harnesses makes installation a breeze, but these custom harnesses are also built for lasting durability. Each harness features integrated block diodes. These diodes isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. Each CURT towed-vehicle RV harness comes with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle and all the necessary hardware for a complete installation., CUSTOM RV WIRING HARNESS, SELECT FORD F-250, F-350 WITH BACKUP SENSORS. Connects a towed vehicle to an RV using a standard 4-way flat trailer plug. Simple plug-and-play design eliminates the need for cutting or splicing. Integrated block diodes isolate sensitive vehicle electronics from RV signals. Uses towed vehicle's existing taillights, brake lights and turn signals. Notes: Includes harness, 4-flat extension, mounting bracket and hardware -
The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT #52041 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch and mounting hardware. -
The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH SIDE-LOAD BATTERY #52042 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware. -
The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH TOP-LOAD BATTERY #52044 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware. -
This replacement battery case for breakaway kits measures 5-7/8" wide, 5-3/8" high and 3-1/2" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a special lockable metal bracket and bar to accept a padlock and greatly deter tampering and theft. The metal bracket also features mounting holes to allow this breakaway battery case to be conveniently mounted on your trailer. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5-7/8" X 5-3/8" X 3-1/2" BREAKAWAY BATTERY CASE WITH LOCKABLE BAR #52090 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Constructed from durable polyethylene plastic. Bolt-on metal bracket allows for secure mounting on the trailer. Lockable bar accepts a padlock for increased security. -
Magnetic tow lights from CURT add temporary tail lights to your vehicle when dinghy towing. This towing light kit includes two magnetic trailer lights, a wiring harness with a 4 pin trailer wiring connector and snap locks for easy splice-in installation. When dinghy towing your vehicle behind your RV, simply stick the magnetic tow lights onto the roof of your car, plug the wiring harness into your RV's standard 4-way flat and you're ready for your next adventure., MAGNETIC TOW LIGHTS WITH STORAGE CASE #53204 Easily adds tow lights to a dinghy-towed vehicle or trailer without lights. Perfect for boats, RVs and flat towing applications. 20' cord with 4-way flat plug allows for plug-and-play convenience. Provides turn signal, tail light and brake light functions. Non-scratch magnetic base protects vehicle finish. Heavy-duty plastic case allows for convenient storage. Snap locks included for simple, secure splice-in connection. Notes: Includes two magnetic tow lights, wiring harness, snap locks and storage case. -
If you're towing your vehicle along for your next RV adventure, Bring It® with CURT! CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing. This particular RV dinghy tow wiring harness is designed for select years of the Ford F-150 with LED taillights (see application info to verify fitment). With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing tail lights, turn signals and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights are able to operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. The simple plug-and-play design of CURT towed-vehicle RV harnesses makes installation a breeze, but these custom harnesses are also built for lasting durability. Each harness features integrated block diodes. These diodes isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. Each CURT towed-vehicle RV harness comes with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle and all the necessary hardware for a complete installation., CUSTOM TOWED-VEHICLE RV WIRING HARNESS, SELECT FORD F-150 WITH LED TAILLIGHTS. Connects a towed vehicle to an RV using a standard 4-way flat trailer plug. Simple plug-and-play design eliminates the need for cutting or splicing. Integrated block diodes isolate sensitive vehicle electronics from RV signals. Uses towed vehicle's existing taillights, brake lights and turn signals. Notes: Includes harness, 4-flat extension, mounting bracket and hardware
-
Magnetic tow lights from CURT add temporary tail lights to your vehicle when dinghy towing. This towing light kit includes two magnetic trailer lights, a wiring harness with a 4 pin trailer wiring connector and snap locks for easy splice-in installation. When dinghy towing your vehicle behind your RV, simply stick the magnetic tow lights onto the roof of your car, plug the wiring harness into your RV's standard 4-way flat and you're ready for your next adventure., MAGNETIC TOW LIGHTS #53200 Easily adds tow lights to a dinghy-towed vehicle or trailer without lights. Perfect for boats, RVs and flat towing applications. 20' cord with 4-way flat plug allows for plug-and-play convenience. Provides turn signal, tail light and brake light functions. Non-scratch magnetic base protects vehicle finish. Snap locks included for simple, secure splice-in connection. Notes: Includes two magnetic tow lights, wiring harness and snap locks. -
This CURT combination light is designed to be a passenger-side trailer light. It features a molded housing and molded lenses to protect the internal components from the elements, and it uses phosphor-bronze contacts to maintain a solid electrical connection to your vehicle. This taillight comes with red lenses and two extra connection points to provide hookups for other lighting fixtures. It easily and securely mounts with the included hardware and does not have a separate light for license plate illumination., COMBINATION PASSENGER-SIDE TRAILER LIGHT WITHOUT LICENSE PLATE ILLUMINATION #53440 Designed to replace rear trailer lights on most trailers. Functions as a tail light, brake light and turn signal. Two extra connections provide hookups for other lights. Features a molded housing with standard red lenses. Phosphor-bronze contacts for good connection in extreme conditions. Bolt-on mounting system for secure installation on the trailer. Exceeds DOT requirements for reflectors and markers. -
This CURT combination light is designed to be a driver-side trailer light. It features a molded housing and molded lenses to protect the internal components from the elements, and it uses phosphor-bronze contacts to maintain a solid electrical connection to your vehicle. This taillight comes with red lenses and two extra connection points to provide hookups for other lighting fixtures. It easily and securely mounts with the included hardware and features an additional light for license plate illumination., COMBINATION DRIVER-SIDE TRAILER LIGHT WITH LICENSE PLATE ILLUMINATION #53441 Designed to replace rear trailer lights on most trailers. Functions as a taillight, brake light, turn signal and license plate illuminator. Two extra connections provide hookups for other lights. Features a molded housing with standard red lenses. Phosphor-bronze contacts for good connection in extreme conditions. Bolt-on mounting system for secure installation on the trailer. Exceeds DOT requirements for reflectors and markers.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved