-
Having a weight rating comparable to a class 5 trailer hitch, weld-on hitches work well on 1/2-ton, 3/4-ton and 1-ton pickup trucks and SUVs, and they are excellent for towing a variety of heavy-duty trailers, such as toy haulers, dump trailers, logging trailers, gravity boxes and small yacht trailers (NOTE: Never exceed the lowest weight capacity of any towing component). This particular weld-on hitch features a gross trailer weight capacity of 15,000 lbs., a tongue weight rating of 1,500 lbs. and a 2" x 2" receiver tube opening. It comes with a scratch-resistant and rust-resistant black carbide powder coat and requires no hardware for installation. It is able to fit a frame between 18" and 60" wide., UNIVERSAL WELD-ON TRAILER HITCH, 2" RECEIVER (18" TO 60" FRAMES, 11-1/2" DROP) #15903 Adjustable frame fits a variety of vehicles (side plates do not come pre-welded). Fits a max frame width of 60" and a minimum of 18". Rated as a class 5 hitch. Tested for safety in accordance with SAE J684. Great for use with utility boxes. Protected by a highly durable carbide powder coat finish. Co-cured in a rust-resistant liquid A-coat, inside and out. Made in USA. Notes: Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities. Adjustable side plates come detached from the main body of the hitch and must be welded on. -
The CURT Venturer NEXT is a powerful, compact, intuitive brake controller that provides dependable operation of your electric trailer brakes from within the cab of your vehicle. It features a sleek, modern design and a low-profile bracket for added clearance. Control 2-6 trailer brakes at a time (1-3 axles) with fully adjustable settings to adapt to your unique vehicle-trailer setup. Venturer NEXT is a redesigned and enhanced iteration of our popular Venturer brake controller. It's compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic brakes, and its slim profile offers a functional and modern aesthetic that provides powerful control of your trailer brakes at your fingertips without dominating your vehicle dash. The LED display shows power adjustments in 1.0 increments so you can check your settings at a glance and the brightness is adjustable for day or night towing. It also comes with a unique mounting bracket that further enhances the units clearance to remain unobtrusive. Venturer NEXT is a time-delay brake controller with fully adjustable power and ramp time. Choose from 10 different gain settings and nine load settings to adjust to your specific towing situation. Ramp-up is displayed with LCD indicators, and the unit has adjustable brightness for day or night-time use. This time-based brake controller is quick and simple to set up, using no internal moving parts and requiring zero leveling. In fact, it can be mounted anywhere needed in your vehicle and at any angle. It is designed to be installed using a CURT brake controller wiring harness for plug-and-play convenience (sold separately)., VENTURER NEXT TIME-DELAY TRAILER BRAKE CONTROLLER #51116 - Slim, low-profile design for a functional, modern aesthetic. Unique bracket system for improved dash clearance. Fully adjustable power and ramp time. Operates 2-6 trailer brakes at a time (1-3 axles). No internal moving parts and no leveling required. 10 gain settings and 9 load settings to adapt to various driving conditions. LCD indicator lengthens as controller applies power. Digital display shows power adjustments in 1.0 increments. Adjustable brightness for optimal visibility. Mounts anywhere in the vehicle, at any angle. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Auto-sleep mode prevents battery drain after five minutes of idle time. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Notes: Includes mounting hardware. Limited lifetime warranty. -
This brake controller mounting bracket is designed specifically to fit the CURT Venturer trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation., VENTURER TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51114 Securely mounts CURT Venturer trailer brake controller #51110. Controller can be mounted anywhere in the vehicle, at any angle. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. NOTES: Includes four mounting screws. -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION BOLT-ON HOOKUP BRACKETS (2-PACK) #17005 Allows for repositioning of spring bars around an LP tank or other obstruction. Replaces factory spring bar brackets or hangers. Bolt-on design uses two bolts per bracket to fasten directly to the frame. Brackets protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Some drilling required. Includes two chain hangers, bolts and pins (chains not included). -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION CLAMP-ON HOOKUP BRACKETS (2-PACK) #17003 Allows for repositioning of spring bars around an LP tank or other obstruction. Replaces factory spring bar brackets or hangers. Clamp-on design uses a bolt to fasten tightly on the frame. Brackets protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes two chain hangers, bolts and pins (chains not included). -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., WEIGHT DISTRIBUTION LIFT HANDLE #17112 Allows for easy leveraging of weight distribution hookup brackets. Compatible with CURT weight distribution replacement hookup bracket #17008. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2-1/2" SHANK, 2" DROP, 6" RISE) #17131 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2-1/2" x 2-1/2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a highly durable carbide black powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2-1/2" SHANK, 8" DROP) #17132 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2-1/2" x 2-1/2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a highly durable carbide black powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 14-1/2" DROP) #17125 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. Not designed to be used in the rise position. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17100 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17102 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity. -
A CURT weight distribution hitch gives you stable, controlled towing for your vehicle and trailer by redistributing the weight at the coupling point and leveling the entire vehicle-trailer combination. All weight distribution hitches use an adjustable shank to mount onto the receiver hitch on your vehicle, giving you the ability to find the exact height needed for each trailer load., WEIGHT DISTRIBUTION SHANK (2" SHANK, 2" DROP, 6" RISE) #17103 Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 3/4" diameter holes are spaced 1-1/4" from center to center. Fits 2" x 2" hitch receiver tube opening with 5/8" hitch pin hole. Constructed from solid steel for reliable strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank only (weight distribution hitch sold separately). Limited to spring bar capacity.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved