-
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT JEEP WRANGLER JK UNLIMITED #2074101 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT FORD F150, F250, F350, F450, F550 CREW CAB #2074120 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT SILVERADO, SIERRA 1500, 2500, 3500 EXT. CREW #2074108 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail. For a highly weather-resistant finish, ARIES Rocker Step running boards are shielded in a dual-layer E-coat and textured black powder coat. This finish is rust, chip and UV-resistant, promoting long-lasting durability of the steel side steps. The unique texture of the finish also provides the additional advantage of helping to hide minor scuffs, scratches and even grime accumulated on the trail. This allows the Rocker Steps to maintain a clean, consistent finish. ARIES Rocker Steps are designed for an easy and highly secure installation. Each set if made vehicle-specific to install with pre-existing mounting points and no drilling required. They offer a custom fit without any of the hassle. This particular set of Rocker Step running boards is designed to fit specific years of the Jeep Wrangler (see application information to verify fitment with your vehicle). NOTE: These Jeep Wrangler side steps come with mounting hardware for a complete installation. For enhanced rigidity and maximum strength out on the trail, Rocker Steps come with welded mounting brackets. The brackets are pre-attached and welded into place rather than using nuts and bolts. This greatly increases the strength of the boards and speeds up the installation process., ROCKER STEP RUNNING BOARDS, SELECT JEEP WRANGLER TJ #2074102 Double-tube layout and 3" wide top plate provide a solid step. Heavy-duty design offers extra protection for the sides of the vehicle. Flat profile increases ground clearance to be off-road ready. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. High-strength, all-steel construction with no plastic parts. Pre-welded mounting brackets for increased rigidity and simpler installation. No-drill, vehicle-specific application for a custom fit. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes side steps and mounting hardware. -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT JEEP WRANGLER JL UNLIMITED #2074118 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail. NOTE: These Ram 1500 side steps come with mounting hardware for a complete installation., ROCKER STEP RUNNING BOARDS, SELECT RAM 1500 CREW CAB #2074112 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents., ROCKER STEP RUNNING BOARDS, SELECT SILVERADO, SIERRA 1500, 2500, 3500 CREW CAB #2074109 Double-tube layout and 3" wide top plate provide a solid step. Heavy-duty design offers extra protection for the sides of the vehicle. Flat profile increases ground clearance to be off-road ready. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. High-strength, all-steel construction with no plastic parts. Pre-welded mounting brackets for increased rigidity and simpler installation. No-drill, vehicle-specific application for a custom fit. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes side steps and mounting hardware -
Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made from solid steel with zero plastic parts. Their angular design and stamped, non-skid treads are geared for hardworking trucks, providing reliable footing to get the job done. These commercial-duty running boards feature a tough, textured black powder coat finish that not only protects against rust but also has the unique ability to hide minor scratches and grime. The boards install using the ARIES VersaTrac mounting system for easy, no-drill installation and added customization options., RIDGESTEP 6-1/2" X 96", 36" BLACK STEEL RUNNING BOARDS (NO BRACKETS) #C3696 Includes one pair of running boards (VersaTrac mounting brackets sold separately) Includes one pair of running boards (VersaTrac mounting brackets sold separately). Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made from solid steel with zero plastic parts. Their angular design and stamped, non-skid treads are geared for hardworking trucks, providing reliable footing to get the job done. These commercial-duty running boards feature a tough, textured black powder coat finish that not only protects against rust but also has the unique ability to hide minor scratches and grime. The boards install using the ARIES VersaTrac mounting system for easy, no-drill installation and added customization options., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS (NO BRACKETS) #C2885 Includes one pair of running boards (VersaTrac mounting brackets sold separately). Includes one pair of running boards (VersaTrac mounting brackets sold separately). Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Toyota Tundra extended cab (see application info to verify fitment). For rust resistance that can go the distance, these Toyota Tundra running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 75" BLACK STEEL RUNNING BOARDS, SELECT TOYOTA TUNDRA DOUBLE CAB - High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2875 and VersaTrac brackets #2055155. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Chevrolet Colorado and GMC Canyon (see application info to verify fitment). For rust resistance that can go the distance, these Chevrolet / GMC running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS, SELECT COLORADO, CANYON - High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2885 and VersaTrac brackets #2055104. -
RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Toyota Tundra crew cab (see application info to verify fitment). For rust resistance that can go the distance, these Toyota Tundra running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS - High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2885 and VersaTrac brackets #2055155. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., ROCKER STEP RUNNING BOARDS, SELECT TOYOTA TACOMA #2074151 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 75" BLACK STEEL RUNNING BOARDS, SELECT FORD F-250, F-350 #2055523 Includes RidgeStep running boards #C2875 and VersaTrac brackets #2055123. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS, SELECT FORD RANGER CREW CAB #2055552 Includes RidgeStep running boards #C2885 and VersaTrac brackets #2055103. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 91" BLACK STEEL RUNNING BOARDS, SELECT FORD F-SERIES CREW #2055519 Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055121. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS, SELECT FORD F-SERIES #2055521 Includes RidgeStep running boards #C2885 and VersaTrac brackets #2055124. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 75" BLACK STEEL RUNNING BOARDS, SELECT FORD F-150 #2055517 Includes RidgeStep running boards #C2875 and VersaTrac brackets #2055120. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 75" BLACK STEEL RUNNING BOARDS, SELECT SILVERADO, SIERRA CREW #2055551 Includes RidgeStep running boards #C2875 and VersaTrac brackets #2055105 Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 91" RUNNING BOARDS, SELECT SILVERADO, SUBURBAN, SIERRA, YUKON #2055512 Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055101 Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. Crew Cab (Gas) -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 91" STEEL RUNNING BOARDS, SELECT DODGE, RAM 1500, 2500, 3500 #2055536 Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055111. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Dodge Durango (see application info to verify fitment). For rust resistance that can go the distance, these running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 75" BLACK STEEL RUNNING BOARDS, SELECT DODGE DURANGO - High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2875 and VersaTrac brackets #2055181. -
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Chevrolet Silverado and GMC Sierra 1500, 2500 HD or 3500 HD crew cab (see application info to verify fitment). For rust resistance that can go the distance, these Chevrolet / GMC running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 91" BLACK STEEL RUNNING BOARDS, SELECT SILVERADO, SIERRA CREW #2055541 High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055105.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved