-
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT FORD F150, F250, F350, F450, F550 CREW CAB #2074120 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
For the offroader in every truck, Jeep and SUV owner, ARIES Rocker Step running boards offer more than a solid step up. With their heavy-duty design, they provide extra side protection against scuffs, dings, dents and other threats out on the trail and plenty of ground clearance for the wildest offroad trails. They also feature a high-strength, highly durable construction, an extra-rigid design and a no-drill custom fit. When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents. To optimize these rocker guard steps even further for offroading, they mount high and tight against the sides of the vehicle. This allows them to better protect the rocker panels and gives them the vertical clearance needed to clear many obstacles on the trail., ROCKER STEP RUNNING BOARDS, SELECT JEEP WRANGLER JK UNLIMITED #2074101 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). No-drill, vehicle-specific application for a custom fit. Pre-welded mounting brackets for increased rigidity and simpler installation. High-strength, all-steel construction with no plastic parts. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile increases ground clearance to be off-road ready. Heavy-duty design offers extra protection for the sides of the vehicle. Double-tube layout and 3" wide top plate provide a solid step. -
ARIES Jeep roof rack crossbars are the perfect way to add storage space to the Jeep Wrangler JK. They feature no-drill, quick-release clamps for easy installation, and they are made from strong, welded steel with a durable carbide black powder coat finish., JEEP ROOF RACK CROSSBARS FOR WRANGLER JK (2-PACK) #2070450 - Adds rooftop storage space on the Jeep JK. Rated for a maximum capacity of 150 lbs. Full-width slotted channels for adjustable positioning of straps, hooks or bolts. Quick-release gutter clamps allow for no-drill, as-needed installation. Constructed from welded steel for reliable strength. Durable carbide black powder coat finish for maximum rust resistance. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes two brackets. Compatible with hardtop only. -
The ARIES grille guard is designed to give your truck, Jeep or SUV that unmistakable aftermarket look. It's the perfect accessory to make your vehicle stand out from the herd and own the road with confidence. The wraparound brush guard configuration, wire headlight cages, horizontal crossbars and rubber-coated vertical risers all work together to not only enhance front-end protection but also to promote an aggressive, customized feel. Each ARIES grille guard is constructed from 1-1/2" heavy-wall tubing to offer excellent strength for the road or trail ahead. The tubes are welded together to the vertical risers, making a one-piece frame for maximum strength and rigidity. We offer a polished stainless steel grille guard finish, constructed from 304 stainless steel for long-lasting rust resistance and an uncompromising shine. We also offer a dual-layer E-coat and semi-gloss black powder-coated steel grille guard option for superior strength and a sleek look. ARIES 1-1/2" tubular grille guards are perfect for customizing the look of your truck, Jeep or SUV. The two finish options allow you to select the color that best complements the existing style of your vehicle. Furthermore, ARIES grille guards come with a customizable center crossbar for LED lights. Pre-drilled into the crossbar are two holes specifically designed for mounting LED work lights or an LED light bar. The light bar can be mounted using ARIES base mount brackets #1110312. ARIES LED lights add useful light on the trail and an eye-catching accent on your vehicle. The wire headlight cages of ARIES grille guards provide additional customization opportunities. The bolt-on 3/8" diameter wires help protect the headlights from brush and debris, and the brush guards are custom-shaped to match the headlight design. The cages can also be removed from the brush guards at any time, offering a more sleek, aftermarket look. Each ARIES tubular grill guard is configured for a unique vehicle application. We make them vehicle-specific to ensure a custom fit without any difficult modifications or even drilling required. The mounting brackets bolt onto the vehicle's frame using pre-existing mounting points, and the risers, brush guards and crossbars are all configured to complement the body lines of each unique vehicle application. This particular custom grille guard is engineered to fit certain years and styles of the Ford Ranger (see application information to verify fitment with your specific year, make, model and style). This Ford Ranger grille guard comes with all necessary mounting hardware for a complete installation., Black Steel Grille Guard, Select Ford Ranger. One-piece, 1-1/2" diameter, heavy-wall tube design. High-strength carbon steel construction. Dual-layer E-coat and black powder coat finish for maximum corrosion resistance. Two pre-drilled holes in the crossbar for mounting LED light bars or work lights. Removable headlight cages for extra protection and a customizable look. Vertical rubber stripping along the risers to help maintain a clean finish. No-drill, vehicle-specific application for a custom fit. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes grille guard and mounting hardware. Grille guard may interfere with forward-facing cameras or sensors. -
There's a big difference between truck accessories that beg for attention and those that truly stand out from the crowd. With the Switchback headache rack from ARIES, you don't just get a unique aftermarket look. This bold, angular, truck headache rack features a highly weatherproof construction, a lightweight design, multiple customization options and a patented, custom-fit installation system -- all to make it the ideal choice for aggressive builds and offroad trucks alike. The Switchback headache rack is set apart with its highly unique design. The angular construction and punched mesh center section give it an aggressive, aftermarket look on modern trucks. Each model is designed to be a custom headache rack for a particular truck application, allowing the lines to contour to the truck cab. This model is built for a custom fit on specific years of the Chevy Silverado 1500, 2500 HD or 3500 HD and GMC Sierra 1500, 2500 HD or 3500 HD (see application information to verify fitment with your truck). To give it the bold strength to go anywhere the trail may take you, the Switchback pickup headache rack is constructed from aluminum alloy. Aluminum ensures a lightweight design to keep cumbersome weight off your offroad truck, and it provides the best defense against the elements. To maximize corrosion resistance, this aluminum headache rack is also shielded in a highly durable carbide black powder coat finish. This not only protects against rain, snow, road salt and grime, but it also resists UV rays and damage from small debris.Each Switchback custom headache rack comes equipped with a patented stake pocket anchoring system for the easiest and most secure installation possible. The anchors simply drop into the stake pockets built into the truck bed walls and are secured with heavy-duty bolts on each side. There is no drilling or tedious modification required. The headache rack is also designed with a three-piece knock-down assembly, making it easy to ship and simple to install. NOTE: This GMC / Chevy headache rack comes with mounting brackets and hardware for a complete installation., SWITCHBACK BLACK ALUMINUM HEADACHE RACK, SELECT CHEVROLET SILVERADO, GMC SIERRA #1110110 Not designed to support cargo loads. Headache rack may interfere with rear-facing cameras. Includes headache rack and mounting hardware. Limited lifetime warranty (five-year finish, one-year parts). All-aluminum construction to be strong, lightweight and rust-free. Slotted top edge accepts various LED lights (three 10" light bars recommended). Full-width slotted edge allows for easy adjustment of the lights. Angular profile contours to the lines of the truck cab for a professional look. Three-piece design bolts together with strong grade-8 hardware. Knockdown assembly ships in three pieces for reduced shipping requirements. Stamped aluminum, octagonal grid center section for a distinct look. Center section can be removed for convenient access to the rear window. -
The ARIES Switchback headache rack is an aggressive, off-road-style truck headache rack that features rust-free construction, an LED-compatible top edge and a patented installation system -- all to make sure your truck not only stands out on the road, but also has the backbone to tackle the trail. The Switchback truck headache rack is built with all-aluminum construction, meaning you will never have to worry about rust. Aluminum offers solid strength while helping to keep your truck lightweight. The aluminum alloy is also protected with a highly durable carbide black powder coat finish that maximizes corrosion resistance and adds a sleek finishing touch. The Switchback is built to readily accept aftermarket lighting. Its top edge is a slotted channel that accepts LED light bars or work lights. Three 10" LED light bars (ARIES #1501260) are recommended. The slotted channel allows for easy installation of the lights and adjustable positioning. Installing the ARIES Switchback aluminum headache rack couldn't be easier with our patented mounting system. It features unique stake pocket anchors that requires no drilling or complicated procedures. Simply drop it in, tighten a single bolt on each side, and you're ready to hit the trails. The Switchback also features a three-piece assembly, making it easier to ship, and allowing you to mount the headache rack without the center section for easy access to the rear cab window. Each ARIES Switchback headache rack is designed for vehicle-specific installation for a custom fit. This particular model fit specific years of the Ram 1500, 2500 or 3500 and Dodge Ram 1500, 2500 or 3500 (see application info to verify fitment). Brackets and mounting hardware are included., SWITCHBACK BLACK ALUMINUM HEADACHE RACK, SELECT DODGE, RAM 1500, 2500, 3500 #1110111 Includes headache rack and mounting hardware. Headache rack may interfere with rear-facing cameras. Not designed to support cargo loads. Limited lifetime warranty (five-year finish, one-year parts). Highly durable carbide powder coat finish for maximum corrosion resistance. Center section can be removed for convenient access to the rear window. Stamped aluminum, octagonal grid center section for a distinct look. Knockdown assembly ships in three pieces for reduced shipping requirements. Three-piece design bolts together with strong grade-8 hardware. Patented stake pocket mounting system for simple, secure installation. Angular profile contours to the lines of the truck cab for a professional look. Full-width slotted edge allows for easy adjustment of the lights. Slotted top edge accepts various LED lights (three 10" light bars recommended). All-aluminum construction to be strong, lightweight and rust-free -
ARIES platform-style roof racks are designed for off-roading and overlanding in your Ford Bronco. If you own a Ford Bronco and are looking to add storage to the roof of your rig, our overlanding roof rack is designed to get your gear down the trail. The thick aluminum construction allows you to easily mount accessories such as cargo boxes, spare tires, pelican cases and gear, or even mount a kayak or canoe. Easily mount light bars and pod lights for 360 degrees of high visibility during night adventures with the side-mounted accessory panels. The ARIES platform-style roof rack for Ford Bronco features thick, 1-1/2" aluminum tube construction, for a robust roof rack that provides strength and durability with the advantage of weight savings, which is ideal when loading up your rig for adventures when excess weight is a concern. Additionally, the aluminum construction is treated with a liquid E-coat chemical bath that prevents corrosion and promotes longevity, and then is finished with a durable, carbide black powder coat that ensures maximum scratch and scuff resistance. This combination keeps your roof rack looking great for many adventures to come. The ARIES Overland roof rack is easy to transport and easy to install. The thick aluminum platform-style design can be quickly bolted up using hand tools, making it easy to install and remove if necessary. Simply bolt onto the roof of your Bronco and you're good to go. The ARIES roof rack is designed to prevent the need for modification of your Ford Bronco, so there is no cutting or drilling of the vehicle body required. Simply bolt up and go with the overland series platform-style roof rack from ARIES., TEXTURED BLACK ALUMINUM PLATFORM ROOF RACK FOR FORD BRONCO 2-DOOR #2070615 - Thick gauge, 1-1/2" aluminum tube construction provides reliable strength. Allows mounting of roof accessories for added storage and functionality. Allows 360-degree light bar and pod light mounting options. Side bracket accessories allow the attachment of many off-roading accessories. Liquid E-coat chemical bath treats the aluminum and prevents corrosion. Durable carbide black powder coat finish for maximum scratch and scuff resistance. Easy bolt-on installation; no drilling or cutting required. Limited lifetime warranty. Notes: Includes all necessary hardware for installation and step-by-step instructions. -
ARIES platform-style roof racks are designed for off-roading and overlanding in your Ford Bronco. If you own a Ford Bronco and are looking to add storage to the roof of your rig, our overlanding roof rack is designed to get your gear down the trail. The thick aluminum construction allows you to easily mount accessories such as cargo boxes, spare tires, pelican cases and gear, or even mount a kayak or canoe. Easily mount light bars and pod lights for 360 degrees of high visibility during night adventures with the side-mounted accessory panels. The ARIES platform-style roof rack for Ford Bronco features thick, 1-1/2" aluminum tube construction, for a robust roof rack that provides strength and durability with the advantage of weight savings, which is ideal when loading up your rig for adventures when excess weight is a concern. Additionally, the aluminum construction is treated with a liquid E-coat chemical bath that prevents corrosion and promotes longevity, and then is finished with a durable, carbide black powder coat that ensures maximum scratch and scuff resistance. This combination keeps your roof rack looking great for many adventures to come. The ARIES Overland roof rack is easy to transport and easy to install. The thick aluminum platform-style design can be quickly bolted up using hand tools, making it easy to install and remove if necessary. Simply bolt onto the roof of your Bronco and you're good to go. The ARIES roof rack is designed to prevent the need for modification of your Ford Bronco, so there is no cutting or drilling of the vehicle body required. Simply bolt up and go with the overland series platform-style roof rack from ARIES., TEXTURED BLACK ALUMINUM PLATFORM ROOF RACK FOR FORD BRONCO 4-DOOR #2070610 - Thick gauge, 1-1/2" aluminum tube construction provides reliable strength. Allows mounting of roof accessories for added storage and functionality. Allows 360-degree light bar and pod light mounting options. Side bracket accessories allow the attachment of many off-roading accessories. Liquid E-coat chemical bath treats the aluminum and prevents corrosion. Durable carbide black powder coat finish for maximum scratch and scuff resistance. Easy bolt-on installation; no drilling or cutting required. Limited lifetime warranty. Notes: Includes all necessary hardware for installation and step-by-step instructions. -
It's one thing to give your Jeep an aggressive look, and it's another to outfit it for the offroad ride. With the ARIES TrailCrusher Jeep bumper, you get both. The TrailCrusher is designed, built and tested to work hard on the trail and give your Jeep the functional advantage. It also features a tough, trail-ready look that's completely customized to fit the Jeep Wrangler JK. The ARIES TrailCrusher bumper for Jeep Wrangler is particularly engineered for hard work offroad using a winch and shackles. Its one-piece design, 3/16" thick steel plate construction and vehicle-specific installation all converge to deliver dependable strength on the front end of the Jeep. The TrailCrusher bumper for Jeep JK is thoroughly tested to provide a winch rating and shackle rating of 12,500 lbs. straight-line pull. Each TrailCrusher bumper is made with a vehicle-specific design, ensuring compatibility with your own unique Jeep Wrangler. This particular custom Jeep bumper fits the Jeep Wrangler JK (see application information to verify fitment with your year, model and style). A rear bumper #2157000 is also available. A vehicle-specific design ensures maximum strength for the bumper and promotes the easiest possible installation. TrailCrusher Jeep bumpers require no drilling for installation, utilizing the pre-existing factory mounting points on the vehicle. The installation also requires no pump relocation, unlike some competitive models. The TrailCrusher installs with heavy-duty 3/8" thick steel brackets for dependable strength and rigidity, and it comes with all necessary hardware for a complete installation., TRAILCRUSHER JEEP WRANGLER JK STEEL FRONT BUMPER, 12.5K #2156000 Models with factory steel front bumper will require the purchase of aftermarket fog lights (not included). Includes bumper and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality. Standard winch mounting platform accepts most types of winches. Welded shackle mounts and 1/4" thick sleeves provide reliable anchoring points. Shackle mounts accept pins up to 7/8" in diameter (#2166071 recommended). No-drill install uses factory mounting points with no pump relocation required. One-piece construction with 3/16" thick, all-steel plates for maximum strength. Narrow width and high ground clearance for an improved off-road-style design. Highly durable carbide black powder coat with rust-resistant E-coat finish. Accepts angular brush guard #2156050 for added winch protection. Center round cutouts accept OE bumper lights. Includes mounting hardware and 3/8" thick brackets for solid installation. -
Every Bronco deserves its time on the trail - ARIES tubular-style fender flares will prepare your Bronco for the trails ahead. Our 5" tubular-style flares are extra wide and provide extended protection to the truck body and paint from trail debris and mud, while allowing for greater clearance and articulation for large, oversized tires. These tubular-style fender flares help to isolate mud and water to the wheel wells and make your suspension more visible, giving your Bronco a distinct, rugged look that sets your rig apart. ARIES tubular-style fender flares are fabricated from hardened T6 aluminum. Robustly built and finished with a corrosion-resistant and scratch-resistant finish, our flares are built for trail use and will protect your rig for many miles, on and off the trail. These bolt-on-style flares are made to last and will protect your rig from mud, dirt, snow, ice and anything else you venture through. The black carbide powder coat finish features a textured finish to avoid scratches and blemishes from brushy trails. These flares provide a bold, rugged look and extra protection that is necessary for advanced adventures on the trail. These ARIES 5" tubular-style fender flares are designed for Ford Bronco two-door or four-door models, and bolt on easily without the need to fabricate or modify the truck body. The flares smoothly contour the truck body and wheel wells, and bolt up easily using factory holes. The kit also comes with the necessary bolts and hardware for a simple and straightforward installation. Please note that drilling may be required., FORD BRONCO TUBULAR-STYLE FRONT FENDER FLARES FOR 2-DOOR & 4-DOOR #1500302 - Tubular-style flares allow for extra clearance for large, beefy off-road tires. Oversized, 5" wide tubular flares isolate mud and water to wheel wells. Provides extra protection to truck body and paint from rocks, sand and debris. Built for the trail with hardened T6 aluminum for robust strength and long life. Highly durable, black carbide powder coat finish. Simple, bolt-on installation and vehicle-specific fit (drilling may be required). Limited lifetime warranty. Notes: Includes mounting hardware. -
Every Bronco deserves its time on the trail - ARIES tubular-style fender flares will prepare your Bronco for the trails ahead. Our 5" tubular-style flares are extra wide and provide extended protection to the truck body and paint from trail debris and mud, while allowing for greater clearance and articulation for large, oversized tires. These tubular-style fender flares help to isolate mud and water to the wheel wells and make your suspension more visible, giving your Bronco a distinct, rugged look that sets your rig apart. ARIES tubular-style fender flares are fabricated from hardened T6 aluminum. Robustly built and finished with a corrosion-resistant and scratch-resistant finish, our flares are built for trail use and will protect your rig for many miles, on and off the trail. These bolt-on-style flares are made to last and will protect your rig from mud, dirt, snow, ice and anything else you venture through. The black carbide powder coat finish features a textured finish to avoid scratches and blemishes from brushy trails. These flares provide a bold, rugged look and extra protection that is necessary for advanced adventures on the trail. These ARIES 5" tubular-style fender flares are designed specifically for Ford Bronco two-door models, and bolt on easily without the need to fabricate or modify the truck body. The flares smoothly contour the truck body and wheel wells, and bolt up easily using factory holes. The kit also comes with the necessary bolts and hardware for a simple and straightforward installation. Please note that drilling may be required., FORD BRONCO TUBULAR-STYLE REAR FENDER FLARES FOR 2-DOOR #2500304 - Tubular-style flares allow for extra clearance for large, beefy off-road tires. Oversized, 5" wide tubular flares isolate mud and water to wheel wells. Provides extra protection to truck body and paint from rocks, sand and debris. Built for the trail with hardened T6 aluminum for robust strength and long life. Highly durable, black carbide powder coat finish. Simple, bolt-on installation and vehicle-specific fit (drilling may be required). Limited lifetime warranty. Notes: Includes mounting hardware. -
Every Bronco deserves its time on the trail - ARIES tubular-style fender flares will prepare your Bronco for the trails ahead. Our 5" tubular-style flares are extra wide and provide extended protection to the truck body and paint from trail debris and mud, while allowing for greater clearance and articulation for large, oversized tires. These tubular-style fender flares help to isolate mud and water to the wheel wells and make your suspension more visible, giving your Bronco a distinct, rugged look that sets your rig apart. ARIES tubular-style fender flares are fabricated from hardened T6 aluminum. Robustly built and finished with a corrosion-resistant and scratch-resistant finish, our flares are built for trail use and will protect your rig for many miles, on and off the trail. These bolt-on-style flares are made to last and will protect your rig from mud, dirt, snow, ice and anything else you venture through. The black carbide powder coat finish features a textured finish to avoid scratches and blemishes from brushy trails. These flares provide a bold, rugged look and extra protection that is necessary for advanced adventures on the trail. These ARIES 5" tubular-style fender flares are designed specifically for Ford Bronco four-door models, and bolt on easily without the need to fabricate or modify the truck body. The flares smoothly contour the truck body and wheel wells, and bolt up easily using factory holes. The kit also comes with the necessary bolts and hardware for a simple and straightforward installation. Please note that drilling may be required., FORD BRONCO TUBULAR-STYLE REAR FENDER FLARES FOR 4-DOOR #2500303 - Tubular-style flares allow for extra clearance for large, beefy off-road tires. Oversized, 5" wide tubular flares isolate mud and water to wheel wells. Provides extra protection to truck body and paint from rocks, sand and debris. Built for the trail with hardened T6 aluminum for robust strength and long life. Highly durable, black carbide powder coat finish. Simple, bolt-on installation and vehicle-specific fit (drilling may be required). Limited lifetime warranty. Notes: Includes mounting hardware. -
While many side accessories feature a universal track mounting system for easier installation and inventory requirements, the ARIES VersaTrac mounting system takes things a step further. VersaTrac uses a single set of vehicle-specific brackets to accommodate different side accessory options. This not only means different finish options but also different products entirely. With the brackets installed, any side bar or running board equipped with the VersaTrac mounting system can be attached or swapped out whenever desired. The VersaTrac mounting system saves you time and money. It eliminates the need to purchase and install an entirely new set of mounting brackets with each new side accessory. The mounting brackets are available for purchase as a stand-alone item or as part of a complete kit with compatible side bars and running boards. Use the application information to determine which part numbers will fit your vehicle., VERSATRAC MOUNTING BRACKETS - Compatible with VersaTrac-equipped running boards and side steps. No-drill, vehicle-specific application for a custom fit. Heavy-duty steel construction with a durable black powder coat finish. Co-cured in an E-coat finish for superior rust resistance. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes mounting brackets and hardware only (running boards sold separately). -
ARIES Jeep windshield light brackets easily mount onto your windshield hinges and accept off-road lamps, fog lights, driving lights and more. They feature high-strength carbon steel construction and come with a durable black powder coat finish for lasting protection against the off-road elements., JEEP WRANGLER JK WINDSHIELD LIGHT BRACKETS #AR15800 - Jeep Wrangler JK Windshield Light Brackets. Accepts ARIES 2" square LED work lights #1501252 or others. Securely mounts with pre-existing windshield bolts for no drilling required. Strong steel construction with a durable black powder coat finish. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes driver-side and passenger-side brackets (LED lights sold separately). -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This 10" light bar is designed to be mounted on a bull bar, grille guard, headache rack or other accessory. It offers a 4,900-lumen combo beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. One LED light bar is included in the package., 10" SINGLE-ROW LED LIGHT BAR (4,900 LUMENS) #1501260 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Includes stainless steel screws and a pivoting bracket for custom angling. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes one light bar, mounting hardware and wiring harness. -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This pair of 2" work lights is designed to be mounted onto the top of a bull bar, headache rack or other accessory. Each light offers a 2,200-lumen spot beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. Two lights are included in the package., 2" SQUARE CUBE LED LIGHTS (2,200 LUMENS) #1501252 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Includes stainless steel screws and a pivoting bracket for custom angling. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes two LED lights, mounting hardware and wiring harnesses. -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This pair of 2" work lights is designed to be flush-mounted onto a bull bar, bumper or other accessory. Each light offers a 2,200-lumen flood beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. Two lights are included in the package., 2" SQUARE FLUSH-MOUNT LED LIGHTS (2,200 LUMENS) #1501250 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes two LED lights, mounting hardware and wiring harnesses. -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This 20" light bar is designed to be mounted on a bull bar, grille guard, headache rack or other accessory. It offers a 9,800-lumen combo beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. One LED light bar is included in the package., 20" SINGLE-ROW LED LIGHT BAR (9,800 LUMENS) #1501262 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Includes stainless steel screws and a pivoting bracket for custom angling. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes one light bar, mounting hardware and wiring harness. -
This license plate relocation bracket allows you to reposition your license plate after installing an ARIES 3" bull bar. It mounts directly onto the center crossbar, using existing hardware, and keeps your license plate secure and clearly visible. The bracket is constructed from strong carbon steel and features a durable black powder coat finish for long-lasting protection against the elements., 3" BULL BAR LICENSE PLATE BRACKET #35-0000 Easily bolts onto 3" crossbar, using existing skid plate hardware. Provides a solid mounting location to keep license plate visible. Strong steel construction with a durable black powder coat finish. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes two license plate mounting bolts. -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This 30" light bar is designed to be mounted on a grille guard, headache rack or other accessory. It offers a 14,800-lumen combo beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. One LED light bar is included in the package., 30" SINGLE-ROW LED LIGHT BAR (14,800 LUMENS) #1501264 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Includes stainless steel screws and a pivoting bracket for custom angling. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes one light bar, mounting hardware and wiring harness. -
This license plate relocation bracket allows you to reposition your license plate after installing an ARIES Big Horn 4" bull bar. It mounts directly onto the center crossbar, using existing hardware, and keeps your license plate secure and clearly visible. The bracket is constructed from strong carbon steel and features a durable black powder coat finish for long-lasting protection against the elements., 4" BULL BAR LICENSE PLATE BRACKET #45-0000 Easily bolts onto 4" crossbar, using existing skid plate hardware. Provides a solid mounting location to keep license plate visible. Strong steel construction with a durable black powder coat finish. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes two license plate mounting bolts. -
ARIES LED lights are made to shine bright, last long and take a beating. Each light boasts grade-A LED chips, an IP68-standard breather, waterproof aluminum construction, a 50,000+ hour lifespan and a pedigree of thorough testing and certifications. This 50" light bar is designed to be mounted on a headache rack, roof light mounting bracket or other accessory. It offers a 24,000-lumen combo beam pattern and comes with a waterproof wiring harness and stainless steel hardware for easy, long-lasting installation. One LED light bar is included in the package., 50" DOUBLE-ROW LED LIGHT BAR (24,000 LUMENS) #1501278 Constructed with grade-A LED chips for superior quality. IP68 and IP69K waterproof and dustproof ratings to keep water and air out. Rust-free aluminum housing with rugged, crack-resistant Lexan lens. Durable, painted, UV-resistant and mar-resistant finish. Advanced optics system reduces wasted light for 96% reflector efficiency. Dual, oversize heat sinks maintain low, efficient running temperatures. Instant on-off requires no warmup time. 50,000+ hours average lifespan for five years of continuous use. Passes CE, RoHS, UV, extreme temperature, vibration, dust and salt testing. Operates in temperatures from -40F up to 145F for extreme conditions. Fitted with a strong, waterproof wiring harness for a reliable connection. Includes stainless steel screws and a pivoting bracket for custom angling. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes one light bar, mounting hardware and wiring harness. -
This license plate relocation bracket allows you to reposition your license plate after installing the ARIES AdvantEDGE bull bar. It bolts directly onto the center crossbar, using the pre-existing hardware of the bull bar cover plate, and keeps your license plate secure and clearly visible. The bracket is constructed from lightweight aluminum and features a durable black powder coat finish for long-lasting protection against the elements., ADVANTEDGE BULL BAR LICENSE PLATE BRACKET #2169000 Easily bolts onto crossbar, using existing cover plate hardware. Provides a solid mounting location to keep license plate visible. Lightweight aluminum construction with a durable black powder coat finish. Limited lifetime warranty (five-year finish, one-year parts). Notes: Includes four license plate mounting bolts. -
For added utility on your truck, SUV or Jeep, this tow hook easily bolts into place and features a work load limit up to 9,000 lbs. (limited to the capacity of the mounting structure). It is constructed from solid steel and covered in a durable black powder coat finish for excellent rust resistance. This tow hook is specifically designed for use on ARIES TrailChaser Jeep bumpers but can be mounted on virtually any bumper or other front-end accessory. It also provides a vehicle-specific fit on Jeep Wrangler YJ and TJ models, utilizing the existing factory bolts for installation., BOLT-ON BUMPER TOW HOOK (9,000 LBS.) #15600TW Work load limit of 9,000 lbs. (limited to mounting structure capacity). Utilizes existing factory bolts on Jeep YJ and TJ models. Strong steel construction with a durable black powder coat finish. Not compatible with TrailChaser angular brush guard. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes one tow hook and mounting hardware.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved