-
This organizer features three trays with lids that can be mounted to the rear door of a van. The organizer is a great way to maximize useable storage space in your van. The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you don’t already have a plus nut installation tool., Powder coated gray steel offers maximum strength and durability. The three trays’ interior dimensions are 19” W x 4.2” D x 4” H. Total dimensions are 24.75” H x 20.8” W x 5.5” D. Each tray has 4 steel dividers to compartmentalize the storage space. Trays have clamping lids to secure parts and equipment.
-
Holman’s Hand Sanitation Station keeps water, soap, towels and disposal in one place, making it easier for drivers to sanitize safely on the road., Includes a 2.5 gallon water tank, integrated soap, hand sanitizer, and towel holder, a hook for a waste water capture bucket, and accepts disposal bags. Holds standard 6” diameter paper towel rolls, standard 8 gallon trash bags, and up to 3” diameter soap dispensers for easy restocking. Convenient hook for holding 5 gallon waste water bucket. Can be easily reconfigured for left, right or narrow spaces. Mounts to shelf end panels, partitions, doors, or any flat vertical or horizontal mounting surface. The product includes nuts required for installation. Consider purchasing our Nut Tool (#P9902) if you don’t already have a plus nut installation tool. Dimensions 15.5"L x 14.25 H x 7.25"W - Case 18.16" L x 14.25 H x 13.5 W - With Bottles, Spout & Towels.
-
This set of handles with mounting brackets and quick release pin makes your Holman Hand Sanitation Station mobile. Easy and quick mounting and dismounting of the sanitation station. By pulling the spring loaded pin and lifting up on the handles you can remove the entire station from where it’s mounted to take it onto a jobsite, easily refill the water container, or remove it from the vehicle in freezing conditions., The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you don’t already have a plus nut installation tool. Adds two handles to easily carry the Hand Sanitation Station. Quick release mounting brackets allow for easy liftoff once the locking pin has been disengaged. Spring loaded locking pin makes for quick securing of the station to its mounting location. COMPATIBLE ITEMS: 40116 – Hand Sanitation Station.
-
The Holman Cone Holder keeps your traffic cones secure and neatly stacked., The product includes plus nuts for installation. Consider purchasing our Plus Nut Tool (#P9902) if you donÂ’t already have a plus nut installation tool. Mounts to van floor. Holds Cones upright and in place. Holds up to four cones.
-
Water cooler bracket for water jug with strap. Fit 2, 3 and 5 gallon cooler., The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you donÂ’t already have a plus nut installation tool. Sturdy wire construction. Fits 2, 3, and 5 gallon cylindrical water jugs. Holman Warranty.
-
Instant small parts organization in a snap! These small parts bins stack and fit securely in our Holman steel shelves. Stackable dividable small parts bins., 5" Plastic Small Parts Shelf Bin 5 wide x 3.5 high x 11 deep. Stackable design. 5 dividers included for small parts organization. Fits all standard 14" Holman shelves.
-
The Cargo Case Shelf Bracket mounts to the bottom of Holman shelving to create a space to store Small and Large Cargo Cases 40350 and 40351., Bracket attaches to underside of all steel Holman shelves mounted "lip up". Creates more usable space to store Cargo Cases. Supports Large (40351) and Small (40350) Cargo Cases. Includes one 40351 - Large Cargo Case. Fitment: Fits all Holman Shelving (except Folding Shelves).
-
Interior van light that mounts to the ceiling of the van. Includes with LED motion sensing light and mounting brackets and hardware., The product includes plus nuts for installation. Consider purchasing our Plus Nut Tool (#P9902) if you donÂ’t already have a plus nut installation tool. New easy installation design. Motion detection sensor. Moisture-resistant, vibration proof design. NFPA and Triple K compliant. Powerful 2100 lumen output. Excellent replacement for fluorescent light fixtures. White powder coated finish light, and gray powder coated finish bracket.
-
LED worklight to mount outside your cargo van or truck. Wire into your vehicles 12V power supply to illuminate outside work areas., Size: 110*40*128mm. LED: 9pcs LED(s). Voltage: 10-30V DC. Raw Power: 27W. Effective Power: 17W. Current Flow: 1.50@12V; 0.75A@24V. Raw Lumen: 2376LM. Effective Lumen: 1380LM. Luminous Efficacy: 81.2LM/W. EMC Rate: R10. Beam Pattern: Spot. IP Rate: IP6K8K. Housing Material: Aluminum Alloy. Lens Material: PC Lens. Bracket: Stainless Steel. Working Temperature: -45 ~60°C. Service Life: ?30000Hours. Guarantee: 1 year.
-
The Holman Rear Door Safety Grab Handles provide a sturdy and secure way to enter and exit your Ford Tranist Van., The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you donÂ’t already have a plus nut installation tool. Heavy duty steel rail. Quick install. Orange powder coat finish. All mounting brackets included. Mounting Hardware Included.
-
The Kargo Slide is a sliding surface that can be installed on the floor of all full-sized vans. Shelf units, lockers, and other van interior equipment can be mounted to the slide to allow for easy access. The slide can be installed against the partition of the van to allow slide access out the side door of the van, or at the rear of the van to allow easy access to equipment without entering the vehicle., Mounts to floor of a van to increase accessibility to equipment, tools or materials. 58” x 18-5/8” mounting surface. Width is wide enough to hold Holman shelving and cabinet accessories. Slides out 46” for accessibility outside of the van. 400lb load rating. Dimensions: 60.5 x 18.5 x 5.5 in.
-
Holman cargo racks are super strong and easy to use. This kit includes rack and mount kit., Rear roller bar for Kargo Master three crossbar racks provides easier ladder and material loading from the rear of the van. Use with 4A823+4A824. Mounts to the GM three crossbar aluminum rack. Lightweight and strong aluminum prevents rusting. Easy to maintain white powder coat finish.
-
Steel peg board that can be mounted in many locations for organizing tools and material. This product is especially useful mounted on the wall above our workbench products, attached to partitions, or shelf end panels. The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you donÂ’t already have a plus nut installation tool.,
-
Steel peg board that can be mounted in many locations for organizing tools and material. This product is especially useful mounted on the wall above our workbench products, attached to partitions, or shelf end panels. The product includes plus nuts required for installation. Consider purchasing our Plus Nut Tool (#P9902) if you don’t already have a plus nut installation tool., Compatible with KM peg board accessories. Easy to mount on KM products and van walls. Powder coated gray to fit with KM interior productsMounts vertically in wide or narrow orientation. COMPATIBLE ITEMS: 42010 – U-Shaped Hook for Peg Boards. 42011 – Double Hook for Peg Boards. 42012 – Single Hook For Peg Boards.
-
The Quick Clamp add-on for Pro III racks makes securing ladders on all Pro III (1-5/8” D) racks quick and easy. The locking pin and spring loaded ladder pad secure the ladder to the side rail of the rack. Use with 80000, 80020, 80030, 80060, 40890, 8006A, 8008A, 8010A, 8012A, or 8016A., Quick and easy install. Mounts to Pro III Racks (1-5/8” D). Locking pin and spring loaded ladder pad securely hold ladder in place. Easy to reach and operate handle. Holman Warranty Compatible Racks: 80000 – Pro III Rack - Full Size Trucks without Cap. 80020 – Pro III Rack - Mid Size Trucks without Cap. 80030 – Pro III Rack - Mid Size Trucks with Cap. 80060 – Cargo Rack - PRO III - Compact Vans or Trucks w/ Cap. 40890 – Cargo Rack - PRO III Low Roof Transit, NV & ProMaster, Std Roof Sprinter, GM. 8006A – Cargo Rack - PRO III HD Aluminum - Compact Vans or Trucks w/ Cap. 8016A – Cargo Rack HD Aluminum - PRO III Low Roof Transit, NV & ProMaster, Std Roof Sprinter, GM. 8008A – Cargo Rack - PRO III HD Aluminum - Trucks w/ Cap - 80" L. 8010A – Cargo Rack - PRO III HD Aluminum - Compact Vans or Trucks w/ Cap - 100" L. 8012A – Cargo Rack - PRO III HD Aluminum - Trucks w/ Cap - 120" L.
-
Clamp-on ratchet straps (sold in sets of two) enable you to quickly and safely secure cargo on top of the rack. Required by law in some states, these Clamp-on ratchet straps are specially designed for your Holman Pro Series rack., Quickly and safely secure cargo on top of the rack. Specially designed for your Holman rack. Straps have a breaking strength of 2,000 lb and support safe working loads of 677 lb. Straps are 84" in length. Compatible Racks: Truck Racks - 04000, 06000, 06010, 78000, 78003, 78010, 78013, 79000, 79010.
-
Clamp-on ratchet straps (sold in sets of two) enable you to quickly and safely secure cargo on top of the rack. Required by law in some states, these Clamp-on ratchet straps are specially designed for your Holman Pro III Series rack., Professional-grade retractable ratchet tie-down system. Straps have a breaking strength of 2,000 lb and support safe working loads of 677 lb. Straps are 84" in length. Permanent one-bolt installation; dual safety lock security. Includes mounting kit for Pro III racks. 1 pair. Compatible Racks: Pro III Truck Racks - 80000, 80020, 80030. Pro III Cargo Racks - 80060, 8006A, 40890, 4089A.
-
Clamp-on ratchet straps (sold in sets of two) enable you to quickly and safely secure cargo on top of the rack. Required by law in some states, these Clamp-on ratchet straps are specially designed for your Holman rack Pro Series Rack., Quickly and safely secure cargo on top of the rack. Specially designed for your Holman rack. Straps have a breaking strength of 1,400 lb and support safe working loads of 466 lb. Straps are 72" in length. Compatible Racks: Truck Racks - 04000, 06000, 06010, 78000, 78003, 78010, 78013, 79000, 79010.
-
The Quick Clamp Cross Bar can be positioned anywhere along the length of the rack to provide additional support where needed. Can be removed with tools to accommodate taller loads., Quick clamp allows positioning anywhere along the length of the rack. Easily removable with tools. Holman Warranty. Compatible Racks: #80000 - Pro III Rack - Full Sized Trucks Without Cap. #80020 - Pro III Rack - Mid Sized Trucks Without Cap. #80030 - Pro III Rack - Mid Sized Trucks With Cap.