-
For mounting the CURT sway control unit #17200, this sway control tab provides a secure solution and an alternative when a weight distribution hitch is not needed. It is designed to be welded onto a ball mount or other insert and provide a mounting platform for the CURT sway control ball #40093., WELD-ON SWAY TAB #45822 Welds onto a ball mount or trailer hitch for sway control. Sway control unit helps limit lateral trailer movement. Made in USA. -
A sway control unit is an inexpensive solution to the problem of a wandering trailer. CURT sway control units are designed to attach to your vehicle and trailer at the coupling point and counteract any lateral movement in your trailer, keeping your tow load straighter on the road and giving you more control over your vehicle. The sway bar uses a material like that used in brake pads to provide the necessary resistance while still allowing your vehicle to complete proper turns with your trailer attached. The sway control mounts onto the frame of your trailer and connects to the vehicle's ball mount using a separate trailer ball from that used for coupling the trailer. This sway control replacement ball is designed to attach a sway control unit to the vehicle-side of the connection. With its 5/8" shank diameter, it mounts into the mounting tab of a weight distribution hitch or a sway control ball mount. It features a ball diameter of 1-1/4" to fit the CURT sway control unit #17200 and features a chrome-plated finish for long-lasting rust resistance., REPLACEMENT 1-1/4" SWAY CONTROL BALL (5/8" X 1-3/4" SHANK, PACKAGED) #40010 Hitch-mounted attachment ball for the sway control unit #17200. 5/8" diameter shank fits most weight distribution hitches. Also compatible with sway tab ball mount #45820 or weld-on sway tab #45822. Sway control helps reduce lateral trailer movement. Constructed from high-strength steel. Protected by a durable chrome-plated finish. Zinc-plated hex nut and helical lock washer for secure mounting. Notes: The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank -
This sway control ball kit is designed to bolt onto the tongue of a trailer frame to provide a mounting place for the CURT sway control unit #17200. It features a welded trailer ball and a thick mounting plate and comes with four self-tapping screws to easily attach to the trailer frame. It also includes two attachment clips., TRAILER-MOUNTED SWAY CONTROL BALL FOR #17200 #17201 Attaches directly to trailer frame for attachment of sway control #17200. Comes with four self-tapping bolts for easy installation. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). -
While many weight distribution hitches are made to be compatible with a sway control attachment, the CURT TruTrack is an advanced WD system that integrates the sway control function into the design of the hitch. It combines precise weight distributing with integrated sway control to deliver the smoothest, safest ride possible., REPLACEMENT TRUTRACK WEIGHT DISTRIBUTION L-PINS & CLIPS #17513 Compatible with the CURT TruTrack weight distribution system. Helps hold the spring bars in place laterally and vertically. Retainer clips provide easy installation and secure attachment. Notes: Includes two pins and two clips. -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., REPLACEMENT TRUNNION BAR WEIGHT DISTRIBUTION CONICAL WASHERS #17314 Includes four washers -
This sway control replacement ball is designed to attach a sway control unit to the vehicle-side of the connection. With its 5/8" shank diameter, it mounts into the mounting tab of a weight distribution hitch or a sway control ball mount. It features a ball diameter of 1-1/4" to fit the CURT sway control unit #17200 and features a chrome-plated finish for long-lasting rust resistance., REPLACEMENT 1-1/4" SWAY CONTROL BALL (5/8" X 1-3/4" SHANK) #40093 Hitch-mounted attachment ball for the sway control unit #17200. 5/8" diameter shank fits most weight distribution hitches. Also compatible with sway tab ball mount #45820 or weld-on sway tab #45822. Sway control helps reduce lateral trailer movement. Constructed from high-strength steel. Protected by a durable chrome-plated finish. Zinc-plated hex nut and helical lock washer for secure mounting. Notes: The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank. -
These replacement clips for the CURT sway control unit are designed to keep it securely mounted in place on the hitch-side and trailer-side ball connections. Two clips are included in this package. The sway control unit is not included., REPLACEMENT SWAY CONTROL CLIPS #19289 Replaces the clips for the CURT sway control #17200. Secures sway control unit ball connection points. Protected by a durable zinc-plated finish. Sway control kit sold separately. Notes: Includes two clips. -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., TRUNNION BAR WEIGHT DISTRIBUTION HEAD ANGLE ADJUSTMENT ROD KIT #17312 Allows for precise adjustment of head angle. Compatible with certain trunnion bar WD hitches. Protected by a durable zinc-plated finish. Notes: Includes two adjustment pins and two washers. -
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., ROUND BAR WEIGHT DISTRIBUTION HEAD ADJUSTMENT KIT #17114 Replaces 1" rivet in round bar weight distribution hitches. Allows for simple adjustment of head angle. Plated in a zinc finish for excellent rust resistance. Notes: Includes one rivet and seven washers.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved