Towing Electrical

  • Discovery is a time-based brake controller, meaning it applies increasing brake pressure the longer your foot is on the brake pedal. It has a digital display for easy monitoring and the ability to manage up to four axles at a time. Discovery mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worry about your trailer brakes. It is compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty. This brake controller mounting bracket is designed specifically to fit the CURT Discovery trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation., DISCOVERY TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51124 Securely mounts CURT Discovery trailer brake controller #51120. Controller can be mounted anywhere in the vehicle, at any angle. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. Notes: Includes four mounting screws.
  • This CURT trailer brake controller is designed to work with quick plugs so it can readily plug into your vehicle's original equipment socket. It also includes a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed., TRIFLEX PROPORTIONAL TRAILER BRAKE CONTROLLER #51140 Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Third axis provides dynamic power adjustments when going up or down a hill. Nine levels of sensitivity adjustment for varying loads or driving conditions. User-selectable power output and trailer brake light activation. Automatic leveling and calibration eliminate setup requirements. Digital display shows power adjustments in 0.1 increments. Built-in reverse-polarity and short-circuit protection. Tow vehicle 'low voltage' and trailer disconnect indicators. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Mounts at various angles, above or below the dash, to increase usability. Auto sleep mode prevents battery drain after five minutes of idle time. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Limited lifetime warranty. Notes: Includes mounting hardware.
  • The TriFlex proportion-based brake controller features a compact size, a digital display and the ability to manage up to eight brakes at a time. The feature that sets the TriFlex apart from many others is its triple-axis motion-sensing accelerometer. This integrated circuit component allows the TriFlex to detect every motion of your vehicle and trailer with exact precision and to then apply the perfect amount of braking power for every situation. The TriFlex also automatically adjusts brake output when going up or down a hill and is compatible with anti-lock brakes and cruise control. It comes with a mounting bracket and hardware and can be mounted at various angles on your vehicle's dash. Best of all, like other CURT brake controllers, the TriFlex is protected by a limited lifetime warranty. These CURT trailer brake controllers are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include mounting brackets and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed., TRIFLEX PROPORTIONAL TRAILER BRAKE CONTROLLERS (6-PACK) #51142 Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Third axis provides dynamic power adjustments when going up or down a hill. Nine levels of sensitivity adjustment for varying loads or driving conditions. User-selectable power output and trailer brake light activation. Automatic leveling and calibration eliminate setup requirements. Operates 2-8 trailer brakes at a time (1-4 axles). Digital display shows power adjustments in 0.1 increments. Built-in reverse-polarity and short-circuit protection. Tow vehicle 'low voltage' and trailer disconnect indicators. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Compact size: 3-1/4" wide, 4" deep, 7/8" tall. Mounts at various angles, above or below the dash, to increase usability. Auto sleep mode prevents battery drain after five minutes of idle time. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Limited lifetime warranty. Notes: Includes six TriFlex brake controls and all mounting hardware.
  • This brake controller mounting bracket is designed specifically to fit the CURT TriFlex trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with six screws for a secure installation., TRIFLEX TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51144 Securely mounts CURT Triflex trailer brake controller #51140. Controller can be mounted at multiple angles. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. Notes: Includes four mounting screws.
  • The interface of the Spectrum trailer brake controller is simple but powerful. It is a single rotary knob with a push-button in the center that allows the driver to adjust brake power output. It is equipped with ten tri-color LEDs (red, blue and green) to show the automated power output of the control. There is no need for a separate display or additional controls, keeping the dash of your vehicle clean, professional and uncluttered. Behind the Spectrum brake controller is a powerful main module with a triple-axis motion-sensing accelerometer. This advanced circuit is able to detect the inertia of the vehicle and trailer on all axes of three-dimensional space. Whatever your speed and whatever grade you are travelling on -- up or down a hill -- the Spectrum brake controller produces the exact amount of power needed for a smooth, safe stop every time. The main module can be mounted with the included mounting brackets or adhesive patch. The Spectrum electric brake controller is a fully compatible unit, able to operate up to eight trailer brakes at a time. It can be used on vehicles with ABS brakes and cruise control, and it works with low-voltage and PWM systems. Like most CURT trailer brake controllers, the Spectrum installs using a quick plug harness. These wiring harnesses are vehicle-specific and plug into any CURT brake controller for a custom-fit installation in the vehicle. The Spectrum also has automatic leveling and calibration features to simplify the setup process., SPECTRUM INTEGRATED PROPORTIONAL TRAILER BRAKE CONTROLLER #51170 Controls all brake settings with a simple push-button rotary knob. Clean, dash-mounted, OEM-style user interface with 10 tri-color LEDs. Main module can be mounted out of sight. Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Easily accessible manual override with the press of a button. Features two installation options: drill mount or surface adhesive mount. User-selectable power output and trailer brake light activation. Automatic leveling and calibration eliminate setup requirements. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Operates 2-8 trailer brakes at a time (1-4 axles). Built-in reverse-polarity and short-circuit protection. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Tow vehicle 'low voltage' and trailer disconnect indicators. Limited lifetime warranty. Notes: Includes mounting hardware. Knob outside diameter is 1.9"
  • Most things in this day and age can be accessed or controlled from a smartphone. With the Echo, that includes your trailer brakes. Echo is powered by a Bluetooth-enabled system that connects right to your smartphone. Your phone becomes the brake control monitoring unit in the cab of your vehicle. There is no need for extra modules, controls, buttons or knobs. The Echo mobile trailer brake controller has one of the easiest installations in the industry. It simply plugs into the standard 7-way RV blade socket at the rear of your vehicle and provides a socket to plug in the trailer harness. It Ts into the connection, going between the vehicle and trailer plugs, and it is completely non-invasive. It also features automatic calibration to help eliminate setup requirements. The Echo trailer brake controller comes with a custom-designed app that can be downloaded for iOS or Android OS phones. With this app, the wireless brake control is able to connect to your smartphone and display brake control settings and activity. It also sends you status updates and allows you to receive incoming calls while the app is running. Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings. With its compact design and simple, plug-and-play installation, the Echo is extremely portable. You can easily transfer it between vehicles and use it with multiple trailers, as long as the vehicle and trailer have a 7-way RV blade connector. The Echo Smart Control app allows you to store multiple vehicle-trailer profiles, making ideal for commercial fleets. Because the Echo mobile trailer brake controller is made to be outside the vehicle, we engineered it for maximum weather resistance. It is constructed with a potted enclosure, meaning the inside of the unit is filled with an epoxy resin that seals off the internal components from moisture and the elements. This ensures long-lasting operation in spite of rain, snow, dirt, mud and more. The Echo also has a retention strap and locking tab for connecting to the 7-way RV blade vehicle socket. The strap and tab help maintain a strong connection, keeping the unit firmly installed. The Echo mobile brake controller operates using a triple-axis motion-sensing accelerometer -- an integrated circuit that produces smooth, safe stops every time. It is compatible with two to four trailer brakes (one to two axles) and can be used with low-voltage or PWM wiring systems. Echo is also compatible with cruise control and ABS brakes and has built-in reverse-polarity protection and short-circuit protection. It is backed by a limited lifetime warranty., ECHO MOBILE TRAILER BRAKE CONTROLLER, 7-WAY, BLUETOOTH SMARTPHONE CONNECTION #51180 Wireless, portable design allows for easy transfer from one vehicle to another. Bluetooth connection to control all brake settings from your smartphone. Custom-designed app monitors brake activity and sends status updates. Zero-tool, plug-and-play install between vehicle-trailer 7-way connectors. Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Stores multiple vehicle-trailer profiles. Multi-color LED indicates power, trailer detection and wireless connectivity. Potted circuit board is sealed off from the elements for lasting durability. Retention strap and locking tab help keep Echo firmly installed into 7-way. Automatic calibration reduces setup requirements. Downloadable app available for Apple iOS and Android OS. Allows incoming calls to be received while app is running. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Built-in reverse-polarity and short-circuit protection. Limited lifetime warranty. Assembled in USA. Notes: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings.. Warning: Avoid distracted driving. Only make adjustments when the vehicle is stationary.. Not compatible, but will not interfere, with Apple CarPlay or Android Auto.
  • This Bluetooth button for the Echo mobile brake controller #51180 is designed to enable hands-free driving. Whether local laws prevent you from using the Echo phone app or you simply prefer a manual touch, this button allows you to activate the trailer brakes with the press of a button whenever necessary. This manual override button functions in tandem with the Echo brake controller and your smartphone. With the button synced using Bluetooth, the Echo continues to operate the trailer brakes normally, as it does with the Smart Control app. However, instead of using the app interface to manually active the trailer brakes for whatever purpose, this button provides a phone-free experience (Echo still uses your phone and the app to operate; app must be running for button to operate). The Echo manual override button is compatible with Echo and other Flic applications (powered by Flic programmable Bluetooth button). It provides a long-range Bluetooth connection, while maintaining a very low profile on your dash. The overall diameter is only 1-1/8". It comes with a double-sided adhesive pad for a stick-on installation, and a replaceable CR2016 battery., ECHO BRAKE CONTROLLER MANUAL OVERRIDE BUTTON #51189 Enables manual activation of trailer brakes, using Echo and phone app. App must be running for button to operate. Wireless accessory supports hands-free driving. Compatible with Echo and programmable for other Flic applications. Long-range Bluetooth maintains a strong connection. Includes double-sided adhesive pad for easy mounting on the dash. Soft-touch material for comfortable use. Replaceable battery with lifespan up to three years. Small-footprint, 1-1/8" diameter. Notes: Echo can be used with app alone; button not essential for operation. Includes CR2016 battery. One-year warranty.
  • The Echo® in-line trailer brake controller is truly a brake control for the modern age. It plugs into your vehicle and wirelessly connects to your smartphone, allowing you to control and monitor all trailer brake activity right from your own device. It comes with a customizable app for Apple or Android. Most things in this day and age can be accessed or controlled from a smartphone. With the Echo®, that includes your trailer brakes. Echo® is powered by a Bluetooth-enabled system that connects right to your smartphone. Your phone becomes the brake control monitoring unit in the cab of your vehicle. There is no need for extra modules, controls, buttons or knobs. The Echo® trailer brake controller comes with a custom-designed app that can be downloaded for iOS or Android OS phones. With this app, the wireless brake control is able to connect to your smartphone and display brake control settings and activity. It also sends you status updates and allows you to receive incoming calls while the app is running. Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings. The Echo® in-line brake controller operates using a triple-axis motion-sensing accelerometer -- an integrated circuit that produces smooth, safe stops every time. It is compatible with two to eight trailer brakes (one to four axles) and can be used with low-voltage or PWM wiring systems. Echo® is also compatible with cruise control and ABS brakes and has built-in reverse-polarity protection and short-circuit protection. It is backed by a limited lifetime warranty., ECHO IN-LINE TRAILER BRAKE CONTROLLER, BLUETOOTH SMARTPHONE CONNECTION #51200 Bluetooth connection to control all brake settings from your smartphone. Custom-designed app monitors brake activity and sends status updates. Plugs in behind existing 7-way socket with USCAR connectors. Waterproof enclosure seals and protects circuits against the elements. Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Stores multiple trailer profiles. Operates 2-8 trailer brakes at a time (1-4 axles). Multi-color LED indicator for easy setup and troubleshooting. Clear, in-app warning system for voltage recognition and no-brake situations. Downloadable app available for Apple iOS and Android OS. Sleep mode feature included to reduce power drain. Automatic calibration reduces setup requirements. Allows incoming calls to be received while app is running. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Built-in reverse-polarity and short-circuit protection. Limited lifetime warranty. Notes: Compatible with Echo manual override button #51189 (sold separately) for hands-free driving. If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings. Not compatible, but will not interfere, with Apple CarPlay or Android Auto. Warning: Avoid distracted driving. Only make adjustments when the vehicle is stationary.
  • It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer., BRAKE CONTROLLER HARNESS, SELECT FORD, LAND ROVER, LINCOLN, MERCURY TRUCKS, SUVS #51322 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer., BRAKE CONTROLLER HARNESS, SELECT FORD, LAND ROVER, LINCOLN, MERCURY (PACKAGED) #51323 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Dodge Ram 1500, 2500, 3500, Dakota, Durango and Chrysler Aspen., TRAILER BRAKE CONTROLLER HARNESS, SELECT RAM 1500, 2500, 3500, DAKOTA, DURANGO, ASPEN #51332 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Cadillac Escalade, Escalade ESV, Escalade EXT, Hummer H2, Chevrolet Silverado and GMC Sierra 1500, 1500HD, 1500 Classic, 1500HD Classic, 2500, 2500HD, 3500, 3500 Classic, Avalanche 1500, 2500, Suburban 1500, 2500, Tahoe, Yukon, Yukon XL 1500 and 2500., TRAILER BRAKE CONTROLLER HARNESS, SELECT CADILLAC, CHEVROLET, GMC, HUMMER (PACKAGED) #51353 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
Go to Top