-
Out of stock
These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 7'. It is compatible with certain years of the Ford F-150, F-250 Super Duty and F-350 Super Duty. For trucks with an aluminum body, galvanic corrosion can become a problem when installing vehicle-to-trailer wiring without the appropriate protection. This kit includes isolators that allow you to install the wiring harness extension in an aluminum truck bed without having to worry about ruining the truck's finish. It includes four bolts for secure mounting and four plastic well nuts to isolate the fasteners from all aluminum surfaces., 7' CUSTOM WIRING EXTENSION HARNESS (ADDS 7-WAY RV BLADE TO TRUCK BED, PACKAGED) #57008 Routes a 7-way RV blade socket into truck bed while retaining use of rear socket. Simple plug-and-play design eliminates the need for cutting or splicing. Allows for easy connection of 5th wheel or gooseneck wiring. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 7' extension with right-angle plug for easy installation. Neoprene well nuts isolate steel bolts from aluminum surfaces. Spring-loaded dust cover keeps connector clean when not in use. Slit loom keeps wires contained and well protected. Notes: Requires 2-1/8" hole saw for installation. Includes bolt isolator kit for aluminum truck beds #57007. -
Out of stock
These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 10'. It is compatible with certain years of the Ford F-150, F-250 Super Duty and F-350 Super Duty For trucks with an aluminum body, galvanic corrosion can become a problem when installing vehicle-to-trailer wiring without the appropriate protection. This kit includes isolators that allow you to install the wiring harness extension in an aluminum truck bed without having to worry about ruining the truck's finish. It includes four bolts for secure mounting and four plastic well nuts to isolate the fasteners from all aluminum surfaces., 10' CUSTOM WIRING EXTENSION HARNESS (ADDS 7-WAY RV BLADE TO TRUCK BED, PACKAGED) #57010 Routes a 7-way RV blade socket into truck bed while retaining use of rear socket. Simple plug-and-play design eliminates the need for cutting or splicing. Allows for easy connection of 5th wheel or gooseneck wiring. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 10' extension with right-angle plug for easy installation. Neoprene well nuts isolate steel bolts from aluminum surfaces. Spring-loaded dust cover keeps connector clean when not in use. Slit loom keeps wires contained and well protected. Notes: Requires 2-1/8" hole saw for installation. Includes bolt isolator kit for aluminum truck beds #57007. -
Out of stock
Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle's electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle's power system. This harness provides a 5-way flat connector socket and comes with a circuit-protected converter. It is designed to be a custom wiring harness for certain years of the Toyota T-100 pickup or Toyota Tacoma (including X-Runner and Pre-Runner) CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind., CUSTOM WIRING, 5-WAY FLAT OUTPUT, SELECT TOYOTA TACOMA, HILUX, T-100 PICKUP #56513 Plugs into vehicle tail light assembly to provide a 5-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 5-way flat connects tail lights, brake lights, turn signals and reverse lights. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Ideal for trailers with surge brakes, common with boat trailers. -
Out of stock
Making memories doesn't start when you reach your destination; it starts at the very first mile of your journey. Wherever your road begins and wherever it takes you, Bring It with the power of CURT. CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Ford F-150 with LED taillights (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup on the CURT website). It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, FORD 21-22 F-150 (WITH LED TAILLIGHTS). Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle's electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle's power system. This harness provides a 5-way flat connector socket and comes with a circuit-protected converter. It is designed to be a custom wiring harness for certain years of the Chevrolet Colorado, GMC Canyon pickup, Isuzu I-280 or I-350 pickup or Isuzu I-290 or I-370 pickup CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind., CUSTOM WIRING, 5-FLAT OUTPUT, SELECT CHEVY COLORADO, GMC CANYON, ISUZU I-SERIES #56510 Plugs into vehicle tail light assembly to provide a 5-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 5-way flat connects tail lights, brake lights, turn signals and reverse lightsEquipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Ram ProMaster 1500, 2500 and 3500 (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup on the CURT website). It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT RAM PROMASTER 1500, 2500, 3500 #56478 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Ford Bronco. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT FORD BRONCO #56471 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. NOTE: Bronco wihtout LED Taillights -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Toyota Highlander. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT TOYOTA HIGHLANDER #56452 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Lincoln Aviator. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT LINCOLN AVIATOR #56453 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Toyota Venza. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT TOYOTA VENZA #56460 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Volkswagen Tiguan. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT VOLKSWAGEN TIGUAN #56422 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components. -
Out of stock
CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Jeep Grand Cherokee. It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring., CUSTOM WIRING HARNESS, 4-WAY FLAT OUTPUT, SELECT JEEP GRAND CHEROKEE #56426 Plugs into vehicle tail light assembly to provide a 4-way flat socket. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. Equipped with tail light converter for vehicle-trailer compatibility. Constructed with SMT circuitry for better performance and durability. Dust cover included to keep connector clean when not in use. Backed by a limited one-year warranty. Notes: Vehicle battery connection required. Includes fuse holder, battery connection wiring and other necessary wiring components.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved