Breakaway Systems

  • The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT #52041 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch and mounting hardware.
  • The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH SIDE-LOAD BATTERY #52042 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware.
  • The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH TOP-LOAD BATTERY #52044 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware.
  • This replacement battery case for breakaway kits measures 5-7/8" wide, 5-3/8" high and 3-1/2" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a special lockable metal bracket and bar to accept a padlock and greatly deter tampering and theft. The metal bracket also features mounting holes to allow this breakaway battery case to be conveniently mounted on your trailer. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5-7/8" X 5-3/8" X 3-1/2" BREAKAWAY BATTERY CASE WITH LOCKABLE BAR #52090 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Constructed from durable polyethylene plastic. Bolt-on metal bracket allows for secure mounting on the trailer. Lockable bar accepts a padlock for increased security.
  • This replacement battery case for breakaway kits measures 5" wide, 3-3/8" high and 3-3/4" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a watertight lid with a rubber gasket. This breakaway battery case is also equipped with a screw-tight lid for secure mounting on your trailer. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5" X 3-3/8" X 3-3/4" WATERTIGHT BREAKAWAY BATTERY CASE #52027 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Screw-tight lid features a watertight rubber gasket. Constructed from durable polyethylene plastic.
  • The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 2 BREAKAWAY KIT WITH CHARGER #52028 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using the included charger. Included lockable battery case deters theft and corrosion. Easy one-bolt installation requires no cutting or drilling. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes battery case with mounting bracket, 12V 5 amp sealed rechargeable battery, nylon breakaway switch and battery charger.
  • This replacement battery case for breakaway kits measures 5" wide, 3-1/4" high and 3-7/8" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a lockable tab to accept a padlock and deter tampering and theft. This breakaway battery case is also equipped with a weldable metal bracket with a 3-1/8" inside diameter for convenient mounting on your trailer tongue or trailer jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5" X 3-1/4" X 3-7/8" LOCKABLE BREAKAWAY BATTERY CASE WITH METAL BRACKET #52029 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Metal mounting bracket installs easily on a jack post or A-frame. One-bolt mount mounting system eliminates cutting and drilling. Lockable lid accepts a padlock for increased security. Constructed from durable polyethylene plastic.
  • This replacement battery case for breakaway kits measures 5" wide, 3-1/4" high and 3-7/8" deep to fit a variety of breakaway batteries. It is constructed from durable polyethylene plastic to protect against the elements and features a lockable tab to accept a padlock and deter tampering and theft. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., 5" X 3-1/4" X 3-7/8" LOCKABLE BREAKAWAY BATTERY CASE #52030 Protects battery and charger from the elements and corrosion. Fits CURT trailer breakaway battery #52023. Lockable lid accepts a padlock for increased security. Constructed from durable polyethylene plastic.
  • The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT WITH CHARGER #52040 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using the included charger. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch, battery charger and mounting hardware.
  • This replacement breakaway battery charger is compatible with CURT Soft-Trac 1 and Soft-Trac 2 rechargeable batteries. It offers 12 volts and helps maintain long-lasting breakaway battery usage. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., BREAKAWAY BATTERY CHARGER #52025 Designed to charge a 12-volt breakaway battery. Color-coded wires for easier installation. Compatible with CURT breakaway systems.
  • The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 2 BREAKAWAY KIT #52026 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Included lockable battery case deters theft and corrosion. Easy one-bolt installation requires no cutting or drilling. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes battery case with mounting bracket, 12V 5 amp sealed rechargeable battery, and nylon breakaway switch.
  • This breakaway lanyard is made to fit the CURT breakaway switch #52010. With a 48" cable and high-temp nylon pull, it offers reliable activation of your trailer brakes, when used in combination with the breakaway switch and complete breakaway kit. The 48" length accommodates most vehicle-trailer combinations. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., REPLACEMENT BREAKAWAY SWITCH LANYARD #52020 Connects tow vehicle to trailer breakaway switch. Actives trailer brakes when cable is released during a disconnect. Features 48" of cable with a high-temp nylon pull.
Go to Top