Brake Controller Wiring & Brackets

  • This brake controller mounting bracket is designed specifically to fit the CURT Venturer trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation., VENTURER TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51114 Securely mounts CURT Venturer trailer brake controller #51110. Controller can be mounted anywhere in the vehicle, at any angle. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. NOTES: Includes four mounting screws.
  • The CURT Venturer NEXT is a powerful, compact, intuitive brake controller that provides dependable operation of your electric trailer brakes from within the cab of your vehicle. It features a sleek, modern design and a low-profile bracket for added clearance. Control 2-6 trailer brakes at a time (1-3 axles) with fully adjustable settings to adapt to your unique vehicle-trailer setup. Venturer NEXT is a redesigned and enhanced iteration of our popular Venturer brake controller. It's compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic brakes, and its slim profile offers a functional and modern aesthetic that provides powerful control of your trailer brakes at your fingertips without dominating your vehicle dash. The LED display shows power adjustments in 1.0 increments so you can check your settings at a glance and the brightness is adjustable for day or night towing. It also comes with a unique mounting bracket that further enhances the unit’s clearance to remain unobtrusive. Venturer NEXT is a time-delay brake controller with fully adjustable power and ramp time. Choose from 10 different gain settings and nine load settings to adjust to your specific towing situation. Ramp-up is displayed with LCD indicators, and the unit has adjustable brightness for day or night-time use. This time-based brake controller is quick and simple to set up, using no internal moving parts and requiring zero leveling. In fact, it can be mounted anywhere needed in your vehicle and at any angle. It is designed to be installed using a CURT brake controller wiring harness for plug-and-play convenience (sold separately)., VENTURER NEXT TIME-DELAY TRAILER BRAKE CONTROLLER #51116 - Slim, low-profile design for a functional, modern aesthetic. Unique bracket system for improved dash clearance. Fully adjustable power and ramp time. Operates 2-6 trailer brakes at a time (1-3 axles). No internal moving parts and no leveling required. 10 gain settings and 9 load settings to adapt to various driving conditions. LCD indicator lengthens as controller applies power. Digital display shows power adjustments in 1.0 increments. Adjustable brightness for optimal visibility. Mounts anywhere in the vehicle, at any angle. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Auto-sleep mode prevents battery drain after five minutes of idle time. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Notes: Includes mounting hardware. Limited lifetime warranty.
  • CURT quick plug brake controller harnesses make the installation of your brake controller easy. This brake control harness comes with pigtails to splice into your vehicle's electrical system. When a CURT quick plug harness is not a compatible option for your vehicle, a quick plug with pigtails is the next best thing. These harnesses feature a quick plug end to easily snap into your CURT brake control and colored wires to coordinate with the appropriate electrical function. This universal splice-in harness comes with a protective slit loom sleeve and can easily be installed using the CURT universal wiring kit #51500. It is designed to be compatible with a variety of vehicles that are not equipped with a factory plug for a brake control. For a complete listing of vehicle compatibility, see the CURT application guide., UNIVERSAL TRAILER BRAKE CONTROLLER HARNESS WITH PIGTAILS (PACKAGED) #51516 Splices into a vehicle for a quick plug brake controller connection. Compatible with any CURT brake control. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected. Notes: Uses universal wiring kit for brake controls #51500 (sold separately).
  • CURT quick plug brake controller harnesses make the installation of your brake controller easy. This brake controller harness comes with pigtails to splice into your vehicle's electrical system. When a CURT quick plug harness is not a compatible option for your vehicle, a quick plug with pigtails is the next best thing. These harnesses feature a quick plug end to easily snap into your CURT brake control and colored wires to coordinate with the appropriate electrical function. This universal splice-in harness comes with a protective slit loom sleeve and can easily be installed using the CURT universal wiring kit #51500. It is designed to be compatible with a variety of vehicles that are not equipped with a factory plug for a brake control., UNIVERSAL TRAILER BRAKE CONTROLLER HARNESS WITH PIGTAILS #51515 Splices into a vehicle for a quick plug brake controller connection. Compatible with any CURT brake control. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected. Notes: Uses universal wiring kit for brake controls #51500 (sold separately).
  • This brake controller mounting bracket is designed specifically to fit the CURT TriFlex trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with six screws for a secure installation., TRIFLEX TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51144 Securely mounts CURT Triflex trailer brake controller #51140. Controller can be mounted at multiple angles. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. Notes: Includes four mounting screws.
  • TriFlex NEXT features a triple-axis, motion-sensing accelerometer that ensures highly responsive and smooth stops. The third axis provides dynamic power adjustments when navigating uphill or downhill terrains, further enhancing braking performance. With automatic leveling and calibration, you can eliminate setup requirements and confidently hit the road. The brake controller also includes built-in reverse polarity and short-circuit protection, offering peace of mind during towing. Keep an eye on your tow vehicle's voltage and trailer disconnect status with convenient indicators. The clean and easy-to-read interface provides a full-text readout and troubleshooting capabilities, ensuring effortless operation and maintenance. The TriFlex NEXT can control 2-8 trailer brakes at a time (1-4 axles) with fully adjustable settings that effortlessly adapt to your unique vehicle-trailer configuration. It's compatible with low-volt, PWM, ABS, cruise control, and electric over hydraulic brakes, the slim profile combines functionality with a modern aesthetic, ensuring powerful brake control at your fingertips. Easily monitor your brake settings at a glance, thanks to the LED display that showcases power adjustments in 0.5 increments. The display also offers full-text diagnostics, simplifying troubleshooting, while the adjustable brightness ensures optimal visibility during day or night towing. The TriFlex NEXT proportional brake controller allows for fully adjustable power and ramp time. With its selection of 10 gain settings and nine load settings, you can fine-tune the controller to match your specific towing needs precisely. The ramp-up progress is clearly indicated through LCD indicators, and the brightness can be adjusted to suit daytime or nighttime towing conditions. It offers versatile mounting options, allowing installation anywhere within your vehicle and at any desired angle. For easy plug-and-play installation, we recommend using a CURT brake controller wiring harness (sold separately)., TRIFLEX NEXT PROPORTIONAL TRAILER BRAKE CONTROLLER #51146 - Slim, low-profile design for a functional, modern aesthetic. Unique bracket system for improved dash clearance. Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops. Third axis provides dynamic power adjustments when going up or down a hill. Operates 2-8 trailer brakes at a time (1-4 axles). 10 gain settings and 9 load settings to adapt to various driving conditions. LCD display shows power adjustments in 0.5 increments. Clean, easy-to-read interface with full-text readout and troubleshooting. Day-night mode and adjustable brightness for optimal visibility. Auto-sleep mode prevents battery drain after five minutes of idle time. Automatic leveling and calibration eliminate setup requirements. Built-in reverse-polarity and short-circuit protection. Tow vehicle 'low voltage' and trailer disconnect indicators. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic. Mounts anywhere in the vehicle, at any angle. Plug-and-play install with vehicle-specific quick plug harness (sold separately). Notes: Includes mounting hardware. Limited lifetime warranty.
  • It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. This brake controller wiring kit is designed for vehicles that do not have an included towing prep package. It includes cables, ring terminals, cable ties and a circuit breaker to splice into your vehicle's wiring system and allow installation of a CURT trailer brake controller. This wiring kit is compatible with systems with up to eight brakes., TRAILER BRAKE CONTROLLER WIRING KIT #51500 For tow vehicles not equipped with factory tow package wiring. Compatible with 2, 4, 6 or 8-brake systems (1-4 axles). Designed for use with CURT quick plugs #51515 or #51516. Brake controller and trailer connector are not included. Notes: Includes 10 gauge duplex wire, 10 gauge cross-linked wire, 30-amp circuit breaker, ring terminals, butt connectors and cable ties.
  • CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Volkswagen Atlas, Atlas Cross Sport and ID.4 with factory tow package. For a complete listing of vehicle compatibility, see the CURT application guide., TRAILER BRAKE CONTROLLER HARNESS, SELECT VW ATLAS, CROSS SPORT, ID.4 #51528 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake controller adapter harness is compatible with certain years of the Jeep Wrangler and Jeep Gladiator. For a complete listing of vehicle compatibility, see the CURT application guide., TRAILER BRAKE CONTROLLER HARNESS, SELECT JEEP WRANGLER JL, GLADIATOR #51527 Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs - one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. CURT quick plug harnesses install with plug-and-play convenience to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained., TRAILER BRAKE CONTROLLER HARNESS - Allows a CURT trailer brake controller to be plugged into OEM socket. Quick plug harness installs with plug-and-play convenience. Wire colors match standard brake controller harnesses. Includes 24" of 12 gauge wire for flexible installation. Slit-loom sleeve keeps wires contained and protected.
  • CURT quick plug brake controller harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake controller to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to a CURT brake controller. This brake controller adapter harness is designed to allow competitor brake controller harnesses to be used with CURT trailer brake controllers. It is compatible with Tekonsha, Reese, Draw-Tite and Pro Series vehicle-specific harnesses (The brands listed are registered trademarks of Horizon Global)., TRAILER BRAKE CONTROLLER ADAPTER HARNESS #51520 Allows CURT brake controllers to be used with competitor harnesses. Compatible with Tekonsha, Reese, Draw-Tite and Pro Series harnesses. Connects to any CURT brake controller (except Echo).
  • Discovery is a time-based brake controller, meaning it applies increasing brake pressure the longer your foot is on the brake pedal. It has a digital display for easy monitoring and the ability to manage up to four axles at a time. Discovery mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worry about your trailer brakes. It is compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty. This brake controller mounting bracket is designed specifically to fit the CURT Discovery trailer brake controller. It features slotted screw holes for flexible mounting on your vehicle dash and comes with four screws for a secure installation., DISCOVERY TRAILER BRAKE CONTROLLER MOUNTING BRACKET #51124 Securely mounts CURT Discovery trailer brake controller #51120. Controller can be mounted anywhere in the vehicle, at any angle. Slotted screw holes allow for flexible mounting options. Spare bracket allows use of the same controller in multiple vehicles. Notes: Includes four mounting screws.
Go to Top