-
Easy to install, easier to use! ROCKSTAR Full Width Tow Flaps feature a contoured profile for ultimate protection. Five-sixteenths inch rubber combines with rustproof, black urethane coated aluminum to stop debris from damaging your toys. These lightweight mud flaps are easy to store when not in use. Adapt to changing conditions without the need for extra hardware or tools. Simply attach to model specific, anti-sailing mounting brackets with included yellow zinc linch pins, paired perfectly with a fifth-wheel trailer. ROCKSTAR Full Width Tow Flap offers the perfect fit. Recommended mud flap ground clearance is 6 to 8 in. Suggested clearance with a load is 3 in. minimum to prevent mud flaps from dragging. Designed to fit OEM receivers and bumpers, may not fit aftermarket products., Features: MODEL SPECIFIC DESIGN - Shaped to follow the lines of your pickup for extreme protection and to prevent contact with OEM exhaust. Mounting brackets made from stainless steel decrease sailing and bolt directly to existing holes in the frame, no need for drilling. Perforated frame for OEM Dual Exhaust. For dually, Tow Flap Extension is needed for full coverage. 5/16 IN. COMPOSITE RUBBER - Remains pliable to -40° F and helps prevent debris and ice build-up. Adjustable rubber available and allows up to 4 in. higher than OEM ride height. CORROSION RESISTANT FRAME - Manufactured with a black aluminum stabilizing bar to black urethane coated aluminum plate. EASY ON AND OFF - Tow flap secures to mounting brackets with yellow zinc linch pins. Note: Not compatible with deployable bed step. -
Rock Tamers Heat Shield is a metal add-on mudflap accessory that buffers hot exhaust gases to contact the mudflap. Designed to keep rubber mudflaps from overheating when used on vehicles with rear facing exhaust systems (factory as well as aftermarket)., Rock Tamers Heat Shield; 1 Shield; -
The Arm Clamp Bolt Kit is used in either the Left Or Right Hub Arm (RT039 or RT040) to secure the Flap Support Rod (RT045), Kit Includes: 3 M6 Arm Clamp Bolts, 3 M6 Nylon Insert Hex Nuts, 1 5mm Allen Wrench (solid) -
Fits a 2" Hitch - Bolt Kits (RT051) and (RT052) may be needed to secure hub, Matte Black; Forged Aluminum; 2.5" Center Hub -
Rock Tamers Rock Screen attaches between the two Rock Tamers flaps and eliminates damage from stones, gravel, small debris, tar, etc. while traveling., Constructed of a double layer of heavy-duty, rip-stop truck mesh. Resists fraying/tearing when holes are cut for electrical and hitch penetrations. Measures 33.5" wide x 17.7” deep and is 31.5" between the top corner eyelets. Includes 1 mesh insert and attachment hardware. Install instructions included. -
Rock Tamers RT310 Chevrolet with bowtie stainless steel trim plates are an add-on mudflap accessory item. Rock Tamers system sold separately., Includes two stainless steel Chevrolet Rock Tamers trim plates. -
Rock Tamers RT320 GMC stainless steel trim plates are an add-on mudflap accessory item. Rock Tamers system sold separately., Includes two stainless steel GMC Rock Tamers trim plates -
Rock Tamers RT330 RAM with bowtie stainless steel trim plates are an add-on mudflap accessory item. Rock Tamers system sold separately., Includes two stainless steel RAM Rock Tamers trim plates -
Rock Tamers Mud Flap Exhaust Outlet - an add-on mudflap accessory item that allows hot exhaust gases to flow through the mudflap. Designed to keep rubber mudflaps from overheating when used on vehicles with rear facing exhaust systems (factory as well as aftermarket)., Exhaust Outlet; 2 Pack; -
Rock Tamers B2B Items - 3" Center Hub (Matte Black), Fits a 3" hitch - Bolt Kits RT051 and RT052 may be needed to secure hub - Matte black with forged aluminum -
Rock Tamers RT240 Tail Light Bars are an add-on mudflap accessory that is the perfect solution for consumers who want to make sure their vehicle is seen while towing. Gives your towing vehicle an additional set of tail, stop and turn signal lights., Rock Tamers Tail Light Bars; Black/LED; -
Rock Tamers Bolt Bumpers are soft plastic covers for the Flap Clamp Bolts, which provide a completed look to your Rock Tamers 108 and 110 systems., Rock Tamers Bolt Bumper; Fits Rock Tamers 108/110 Systems; -
Rock Tamers RT231 Heat Shield is an add-on mudflap accessory item that protects your mudflap from high exhaust temperatures. Allows for closer installation of the Rock Tamers Mudflap System to your tail pipe(s) by providing a heat disbursement for hot exhaust gases. Rock Tamers system sold separately., Features: Straight forward installation and versatile positioning allows for customization to your specific requirements. Can be mounted anywhere on your mudflap. Includes "TOP HAT" design ceramic washers to protect the mudflap. Made of 1.0 mm thick stainless steel. Stylish Rock Tamers design works hard and looks great. Includes: 1-Heat Shield, 4-M6 Star Pin Steel Bolts, 4-Ceramic Washers, 8-M6 Steel Washers, 4-M6 Steel/Nylon Nuts, 1-Steel Wrench -
The Trim Plate Bolt Kit is used to secure the Rock Tamers Trim Plate (RT028) to the Mud Flap (RT022)., Kit Includes: 8 M6 Trim Plate Bolts, 8 M6 Trim Plate Spacers, 8 M6 Flat Washers, 8 M6 Nylon Insert Hex Nuts, 1 Locking Star Pin Wrench (black) -
The Rod End Cap Kit is used on the end of the Flap Support Rod (RT045) closest to either the Left or Right Hub Arm (RT039 or RT040), to finish the rod look , Kit Includes: 1 Rod End Cap, 1 M5 End Cap Bolt (Hex Head), 1 M5 Nylon Insert Hex Nut -
The Flap Clamp Bolt Kit is used to connect the Mud Flap (RT022) to the Flap Clamp (RT048), Kit Includes: 5 M8 Flap Clamp Bolts, 5 M8 Flat Washers, 5 M8 Nylon Insert Hex Nuts -
Rock Tamers RT058 M5 Retainer Bolt Kit is used to stabilize the Flap Clamp, which is connected to the top of the mud flap. Plated hardware includes: 1 M5 Flap Retainer Bolt and 1 M5 Nylon Insert Hex Nut, -
Attaches Flap Support Rod (RT045) to either the 2" (RT034) or 2.5" (RT057) Center Hub. Note: Arm Clamp Bolt Kit (RT053) is used to secure Hub Arm to the Flap Support Rod (RT045)., Arm Pivot Bolt Kit (RT051) is used to secure Hub Arm to either the 2" (RT034), 2.5" (RT057), or 3" (RT059) Center Hub. Matte Black, Forged Aluminum. -
The Arm Pivot Bolt Kit is used to secure either the Left or Right Hub Arm (RT039 or RT040) to either the 2", 2.5" or 3" Hub (RT034, RT057, RT059)., Kit Includes: 1 M18 Arm Clamp Bolt, 1 M18 Split Washer, 1 M18 Flat Washer -
Flap Support Rod for Flap Clamp (RT048) and Right (RT039) or Left Arm Clamp (RT040), Stainless Steel; Zinc Coated Steel Tube; Rod End Cap Kit (RT055) adds the finishing touch -
Flap Clamp attaches to top of Rock Tamers Mudflap (RT022), using Flap Clammp Bolt Kit (RT056), Flap Clamp; Matte Black; Secures Flap Rod (RT045); -
Fits a 2" Hitch - Bolt Kits (RT051) and (RT052) may be needed to secure hub, Matte Black; Forged Aluminum; 2" Center Hub -
Replacement mudflap can be used for all 108, 110 and 112 systems. Mudflap measures 24" x 24", Mudflap can be used for both left and right sides. Mudflap is 3/8" thick, fiber reinforced rubber. Rock Tamers trim plate is sold separately, part RT028. -
Bolt Hole Punch punches the top row of pre-molded holes in the mudflap (RT022)., Once holes are punched, assemble cut end of mudflap into the Flap Clamp (RT048). Insert Flap Clamp Bolts (RT056).
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved