-
Set of two drawer locks with two matching keys. Make sure to select the correct locks based off your Full-Size Drawer System. Lock up your tools, hardware, and other valuable gear with our drawer lock and key system for added security. Lock cams have been thickened to resist bending which can disengage lock cam from striker. Steel brace stiffens cam to prevent disengagement from striker reinforcement. Two identical keys per order., NOTE: We have different Drawer Locks depending on the Drawer System you have. If you are purchasing Drawer Locks today with a DECKED System, simply select: PURCHASED NOW W/ DRAWERS. If you already purchased a drawer system, the easiest way to tell which locks you need is to take a look at the underside of your ammo can lids. -
The Crossbox (toolbox) maximizes drawer storage efficiency and organization, nesting within the DECKED drawers. Fits all DECKED drawers: crosswise in all full-size drawers and midsize wide drawers. Lengthwise in midsize narrow drawers., Fitted with an EPDM lid gasket for weatherproof storage, the Crossbox features an easy carry handle, a removable small tool and parts organizer tray, and multiple grip points for easy retrieval from system drawers. The Crossbox is rugged, durable, and meant to take a beating. 672 Cubic Inches Weight Limit: 40 lbs. Dimensions: 17.5" x 10.75" x 7.75" -
The Crossbox (toolbox) maximizes drawer storage efficiency and organization, nesting within the DECKED drawers. Fits all DECKED drawers: crosswise in all full-size drawers and midsize wide drawers. Lengthwise in midsize narrow drawers., Fitted with an EPDM lid gasket for weatherproof storage, the Crossbox features an easy carry handle, a removable small tool and parts organizer tray, and multiple grip points for easy retrieval from system drawers. The Crossbox is rugged, durable, and meant to take a beating. 672 Cubic Inches Weight Limit: 40 lbs. Dimensions: 17.5" x 10.75" x 7.75" -
Keep expensive tools, rods, and gear locked in your Drawers or Stash Bins, out of harm's way. Designed to fit Drawer Systems and Stash Bins., Features: Comes in packs of two, three, and six. Fitmetn: Fits all DECKED Drawer Systems (Does not fit legacy systems). Does NOT fit DECKED Tool Box. 2 pack is two Drawer locks. 3 pack works for both Drawers and Stash Bins. 6 Pack contains two Drawer locks and 4 Stash Bin locks. Sepcs: Unique, custom key for each pack of locks -
The DECKED D-Box (toolbox) maximizes drawer storage efficiency and organization, nesting within the DECKED drawers. Fits all full-size drawers and midsize wide drawers., A short full-size 5'5" bed length system will accommodate two D-Boxes per drawer and standard full-size 6'6" system will accommodate three D-Boxes per drawer. Includes: Recessed locking levers, EPDM gasket, 2 Grip Points, Horizontal and Vertical Carry Handles, Ruler and Common Bolt/Bit Guide, 2 Dividers. 1821 Cubic Inches. Weight Limit: 50 lb. Dimensions: 20.5" x 17.5" x 8" -
The DECKED D-Box (toolbox) maximizes drawer storage efficiency and organization, nesting within the DECKED drawers. Fits all full-size drawers and midsize wide drawers., A short full-size 5'5" bed length system will accommodate two D-Boxes per drawer and standard full-size 6'6" system will accommodate three D-Boxes per drawer. Includes: Recessed locking levers, EPDM gasket, 2 Grip Points, Horizontal and Vertical Carry Handles, Ruler and Common Bolt/Bit Guide, 2 Dividers. 1821 Cubic Inches. Weight Limit: 50 lb. Dimensions: 20.5" x 17.5" x 8" -
Keep expensive tools, rods, and gear locked in your Drawers or Stash Bins, out of harm's way. Designed to fit Drawer Systems and Stash Bins., Features: Comes in packs of two, three, and six. Fitmetn: Fits all DECKED Drawer Systems (Does not fit legacy systems). Does NOT fit DECKED Tool Box. 2 pack is two Drawer locks. 3 pack works for both Drawers and Stash Bins. 6 Pack contains two Drawer locks and 4 Stash Bin locks. Sepcs: Unique, custom key for each pack of locks -
Piecekeepers include two foam-backed, molded resin dividers for transporting shotguns and rifles securely in your DECKED Drawer System. They offer secure, padded cradles that grip the stock and barrel for convenient, easy-to-remove-and-replace access to firearms. Peacekeepers have slotted cutouts to accommodate three long guns per wide drawer or two long guns per midsize narrow drawer. Piecekeepers secure into place inside the drawers. Utilizing the same multi-position drawer slots and locking clips as Drawer Dividers, they can be easily adjusted as needed. Additional clips are included. WIDE PIECEKEEPERS: fit BOTH drawers on full-size truck and cargo van Drawers Systems, AND the WIDE drawer on midsize trucks. Accommodates 3 long guns. DOES NOT FIT THE DECKED TOOL BOX. Piecekeepers only fit the Drawer System. IT IS ENTIRELY POSSIBLE THAT YOUR FIREARM WILL NOT FIT TO ALLOW THE DRAWER TO CLOSE. IN MANY CASES, IT IS IMPOSSIBLE TO KNOW THE FIT UNTIL PHYSICALLY TESTING IT. Piecekeepers are designed for traditional rifles and shotguns. We cannot guarantee your particular flavor of firearm will fit. Due to the variety of shapes, sizes, and dimensions, many modern guns with optics, pistol grips, removable magazines, and other accessories may stack too high to allow the drawer to close. We have provided our best attempt at dimensions., WIDE PIECEKEEPERS: 7.79 tall x 18 5/8 wide, Center slot depth: 4.25, Side slots measured diagonally: 5.25 , Clearance above Piecekeeper is less than 1", Accommodates 3 long guns. Comes in a set of two. Piecekeepers securely transport firearms in your DECKED Drawer System. Designed for traditional rifles and shotguns. The WIDE Piecekeepers are compatible with ALL full-size truck and cargo van drawers. They are also compatible with the WIDE drawer for midsize trucks. Due to the variety of shapes and dimensions, we cannot guarantee your particular flavor of firearm will fit. Many modern long rifles with optics, pistol grips, and removable magazines may stack too high to allow the drawer to close. -
48" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws. -
58" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
-
Transform the top of your Drawer System with the addition of a DECKED CargoGlide. Storage underneath, accessibility on the top. These brackets are the key: No drill, easy installation. Must purchase separately to install CargoGlide on Drawer System., Features: Sturdy integrated mount for CargoGlide. No drill installation. Attach to existing Drawer System Tie Down points. Fitment: Make sure to purchase compatible CargoGlide. NOT compatible with Traction Mat or Battle Mat. Specs: Full-size weight: 19.5 lbs. Midsize weight: 16.3 lbs. Notes: Brackets for Midsize Drawer System -
48" Core Trax 1000 tie-down tracks are designed for use with full-size short bed 5' 5" DECKED systems. Set of two Trax with four stainless steel attachment loops., 48" Core Trax - Core Trax 1000 tie-down tracks are made from 6061-T6 aluminum alloy and powder coated silver. They are custom manufactured to align with the steel tubes in your DECKED decks subframe, allowing you to mount extra hold points on top. The track can be oriented towards the cabside or tailgate side of your truck bed. The 4 attachment loops can be placed at 1" increments along the trax. These DECKED custom Core Trax 1000 are beveled 45 degrees at both ends to avoid snagging your stuff.
Quick Links
Newsletter
TRAIL | STREET | VAN | FLEET
We Got You Covered, Simple As That.
© 2024 The Truck Outfitters | All Rights Reserved